Insert your XP CD and when you see ?Press any key to boot from CD? press a key. Now wait for the XP installer to finish loading up and you will be presented with the option to press R to Repair.
Press R.
The next screen will ask you which Windows installation you would like to log on to. Normally the following will be listed:
1: C:\WINDOWS
Press 1, then Enter to continue.
You may now be asked for the Administrator password. If you know this type it and press Enter. If you don't know the Administrators password it may be blank. Just press Enter or type your username and password.
At the command prompt type:
chkdsk /r and press Enter.
You can use the Hard Drive Makers Testing Utility to Test the Drive
Hitachi / IBM - DFT "Drive Fitness Test"
http://www.hgst.com/hdd/support/download.htm
Works with all manufacturers
Western Digital "Data Lifeguard"
http://support.wdc.com/download/index.asp#dlgtools
Works with WD drives only
Fujitsu "FJDT"
http://www.fel.fujitsu.com/home/drivers.asp?L=en&CID=1
Works with fujitsu models only
Samsung "hutil"
http://www.samsung.com/Products/Hard...ties/hutil.htm
Compatability unknown...
Seagate "Seatools"
http://www.seagate.com/support/seatools
Works with Seagate drives only
Check the memory.
You can test the memory by running Windows Memory Diagnostic that can be downloaded from http://oca.microsoft.com/en/windiag.asp. If memory problems are found, try re-seating the RAM. If it doesn't work, replace the defective RAM.
Let us know how you get on.