Discussion Locked

Boot Problem: Diag. Code - D is yellow

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I just installed Win XP; now my os will not boot. I noticed there are 3-green lights & 1(D)- yellow light on the Diagnostic Code Lights.

The system just hangs at the logo when I start the computer. I purchased & installed a new Hard Drive and memory card -(128MB). This was not the problem because I still can not get past the logo while booting.

Can someone please offer any advice?

Thanks,
Jill

2 replies

by cg it

humm sounds like you've got a MSI board with the D-bracket though the color scheme is green/red and not green/amber.

So what board you got in the box? if it's an MSI board with the D-bracket which light is not green [and the legend for the bracket is top to bottom right to left. IF your looking at the bracket sideways the first light on the bottom left it the top left] The MSI manual that comes with the board has the D-bracket diagnostics code.

by cg it

note there is a sequence to the MSI D-bracket which covers about 16 different BIOS sequences during startup. The last is the O/S booting. success code is [R5 green R4 green R3 green R2 green] if the boot attempt fails the code is [R5 green R4 green R3 green R2 red]. If XP isn't booting try safe mode boot. Might be a driver that XP doesn't like.

This discussion is closed to new replies.