Question Locked

Broken LCD Screen

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
One of my students came to me about a broken LCD screen. It isn't severely broken. She said that she dropped it on it's side, and now there is a crack in the bottom corner, under the surface. The screen is black around the crack and splotchy. She said that the computer was new, and thus is probably still under warranty, but she also said that her parents would take the computer if they found out that she broke it. Is there anyway for her to fix it herself, or for me to fix it? The actual crack is only about 2.5 inches long and it spreads from wall to wall in the bottom right corner, but the black splotches are only at the top and the bottom of the crack. Please help!

4 replies

by cmiller5400

I assume that this is a laptop? This is not a do it yourself job. The whole LCD panel in the laptop must be replaced if cracked (It is essentially one piece). This type of repair must be sent to the factory/service center to replace it since it is under warranty else, if you open the case, it most likely will void what warranty is left.

EDIT: Unless you bought insurance on the laptop, warranty coverage does not usually cover cracks due to abuse. Here is a tutorial on how LCD's are constructed http://www.auo.com/auoDEV/content/technology/technology_tftprocess_popup_en.htm

by maniacman

or you can buy the replacement LCD screen and repair it yourself if you're savvy with fixing things. I once accidentally cracked the screen on my Thinkpad and this place saved me from having to throw away my laptop or pay hefty repair fees to IBM because the unit was out of warranty. Here is the link:

http://www.screentekinc.com/

by mjd420nova

If you have the unit in hand and it is under warranty, a little explanation would get them to send you the part under warranty and in most cases are pretty simple to replace. The front bezel of the display is usually removed by screws hidden under little rubber plugs. It most likely has a flexible flat plastic connector to provide the logic and a small cable for power. The element would be held in place with some small screws. Good luck

This discussion is closed to new replies.