Discussion Locked

Brother HL-1440 Printing Evelopes

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a Brother HL-1440 running Windows XP. When I print evelopes, the address is printed across the width of the envelope. Using MS Word, I am selecting the correct orientation (Stamp in first) in the Printing Options tab of the "Tools" - "Envelopes and Labels". The HL-1440 will only alow an envelope to be inserted with the "Stamp in first". What is going wrong?

3 replies

by skidoggeruk

Here's a crazy idea.

Use the labels bit instead. They are so much easier to do, note "voice of experience". Envelopes were always a pain to print.

If you investigate this further, I remember there is a way to mail-merge multiple addresses, if you are doing multiple postings.

just a thought.

Good Luck

BK

by danltd

I have an HL-1440. It took me a while to figure it out, but it does a great job printing envelopes:
1. Narrow the front manual loader down to envelope height (a #10 is about 4 inches). Place the envelope in the loader print-side up with the flap to your left.
2. In Word highlight your recipient's address and go to Tools, Letters and Mailings, Envelopes and labels. Select the envelopes tab. In options select your envelope size (defaults to #10)and in printing options select face down, clockwise rotation, feed from manual (I think that's default, too.)
3. Click Print and that's it.

This discussion is closed to new replies.