Question Locked

BSOD - IRQL_NOT_ LESS_THAN_OR_EQUAL

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

If I run my computer regularly (I am running in safe mode), this message comes up and then it constantly restarts my computer. Apparently, there is a problem with my si3112r.sys driver, but I am unsure of how to fix it. Before when this used to happen, I would just be able to restore my computer using 'System Restore,' but it does not seem to be working any longer. This happens every few weeks, is there any way that I could fix this problem for good? I am not very good with computers.

Motherboard: (Gigabyte)GA-7N400 Pro2(Rev 1.x)
OS: Windows XP SP2

Thank you for your help.

9 replies

by captbilly1eye

That type of error is typically associated with a video card driver issue or bad RAM.

Download and install the latest driver for your video card from the manufacturer.

The next step is to test the RAM.
Download and run MemTest86:
http://www.memtest.org/
It will need to run for several hours.
When it's done, you'll know if there is a probelm with your RAM or not.

Here's where you can get good info about that si3112r.sys driver:
http://tinyurl.com/2otakl
According to the info there, it appears to be SATA controller driver but it can also be a trojan. You'll need to do a little more investigation.

Please let me know if this helps.
Good Luck.

by kpryd3

Hey, thanks a lot for your help, but I can't seem to fix it. Would there be a way for me to check for the trojan? In safe mode, it's clean, but if I were to load my computer up regularly, it does not give me enough time to run a scan or anything.

by captbilly1eye

Below are some pointers for trojan detection and removal.

However, my recommendation is to first perform a full RAM test using MemTest86
(http://www.memtest.org/).
It may take over four hours to complete the test.
Use the boot CD option to run it.

Then IF that test does not turn up any problems, update your video card drivers. You may have to download them from another computer and transfer the installer via CD or diskette.

Because you mentioned the 'si3112r.sys' driver, I assume that that driver name came up in an error screen at one time or other.
It is known that the Silicon Image SATA driver version 1.0.0.33 causes BSOD errors like you are having.
It is recommended to uninstall that version and install version 1.0.0.29 for greater stability. You will need to consult their tech support for assistance.
http://www.siimage.com/

Lastly, if that does not correct the issue,

using AVG (http://tinyurl.com/fky54) or your own anti-virus program, with the latest virus definitions, perform a full system scan in Safe Mode. You can also use McAfee Stinger (http://tinyurl.com/1x4v).

I would also use this tool: RootKitRevealer (http://tinyurl.com/y3hgq9).

Here is a link to AVG's free RootKit detector and Remover:
http://tinyurl.com/35jq2t

If you determine that there is indeed a virus involved,
I recommend you go here:
http://tinyurl.com/2yyc8q .
TrendMicro has always been my favorite source for virus information and removal.

My second choice would be BitDefender. Here's a link to their extensive library of free removal tools:
http://tinyurl.com/y6opnp

Please let me know what ultimately resolves the issue.
Good Luck

by kpryd3

I greatly appreciate your help, thanks a lot.

Do you think you would be able to guide me through the process of getting rid of my old 'si3112r.sys' drivers and updating to the new ones? Sorry, but I'm not very good with computers. Thanks for your help.

by captbilly1eye

contact Silicon Image tech support for assistance.
http://www.siimage.com/

It will most likely involve downloading the correct (earlier) drivers, version 1.0.0.29, from a different computer and putting the install file on a diskette or CD.
Then, on your computer, you will remove all associated listings in Device Manager, delete specific files on the C drive, install the driver from the previous diskette or CD and rebooting.

They would have all the details and steps.

Good Luck.

by kpryd3

Hey,
While in safe mode, I deleted the si3112r driver in 'Device Manager' and everything that was associated with it in my system32 'Drivers' folder and my computer doesn't seem to start up anymore.

Once I boot-up my computer and it reaches the Windows loading screen, my computer restarts. Is there any way that I could reinstall the si3112r driver so that my computer can run again? I can't even get my computer on 'Safe Mode' anymore.

I have my Windows Startup Diskette, is there anything that I could do with that?

Please help me and thanks in advance.

by 1bn0

Do you have any add in cards? Modem, NIC, Sound Card. etc.

Sometimes with plug and play the settings change creating a conflict with other cards.

Remove them all! You only need cpu+fan, memory and video to boot.

If that works you know what the problem is. Replace one card at a time.

by kpryd3

Hey thanks for getting back to me, but that's not the problem. I deleted an essential driver, so now my computer won't boot. Right when I gets to the Windows loading screen, I get the BSOD for a split second and then my computer restarts. I can't even log on to safe mode anymore because once all the drivers are done loading, it just restarts again.

Would there be any way for me to install my si3112r.sys SATA driver again? Or would there be any way of restoring it? Thanks a lot for your help.

This discussion is closed to new replies.