Question Locked

Can I use my pc monitor's dvi connection to connect directly to my HDTV?

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a older pc using windows xp and my monitor has a vga that is used to connect to the pc and then also and dvi I just discovered, can i connect dvi on monitor directly to dvi input on my tv, when I do that my tv screen is just black, doesn't seem to recognize it???

I also purchased a dvi to vga adapter and tried plugging the dvi cable from tv directly into the pc using the dvi to vga adapter, but also nothing, which is better?

Will either work?

4 replies

by skdtech

the DVI connectors on the monitor and the TV are both inputs.

As to plugging the TV directly into the PC using a VGA-to-DVI adapter, have you gone into the Device Manager to see if the TV is being detected on the PC? if it is then go into your display properties and on the Monitor tab you should see two screens with one grayed out. Select the one that is grayed out and then check the extend my display onto this device box, apply settings and your TV should display your Wallpaper and function as a second display.

by ---tk---

and then... Right click the desktop, go to properties, then settings, click on the grayed out monitor (tv), and check mark the Extend my Windows Desktop to this monitor.

then that will turn on the DVI port. You will need to adjust the Resolution on the TV, some need a specific resolution...

both should Work, and you probably wouldn't notice a difference between the two. After you expand the desktop, you can set it to clone, or make the TV your primary desktop and disable the monitor... you will just need to play around with the settings.

by rog64ert

Not too sure the original question was answered. Question says if it is possible to use the monitor's DVI port to connect to HDTV. VGA from the PC to the monitor, check. Then DVI out from PC's monitor to HDTV? I would think that the ports on both of the monitors are output only. It would be nice if you could 'daisy-chain' monitors using the DVI ports. I beleive the VGA to DVI Adapter and explanation above is the only way to go.

This discussion is closed to new replies.