11 replies
by md_hashim
You probably had an overworked SMPS ;) - seems like you've blown it up - what stopped you from calling the vendor you bought it from?
Hashim
by joaye
by fnugry
I guess the best solution in your case would be to call service and let the technician open your computer, examine it, identify the problem and fix it.
In general, there are very few sources of "noise" in the box. Beeper aside, all the sources are mechanical - fans, disks, tape & CD drives and like. In your case, it may be a mechanical failure in HDD. Try replacing it. Anyway, before you do, I'd suggest checking that the disk bays/disks are connected properly to power and IDE/SCSI controller, connector cables are not stuck in fans, etc.
by joaye
by geroxx
I could not even try a guess on this one without actually being there and seeing it for myself.
I have to agree with the other posts here and get some professional help if you can.
Sorry
by joaye
by bohicam1
When your puter first boots up, go into the CMOS (hit the del key) when prompted and see if your hard drive is being recognized. I have seen 2 puters in the past week alone that for some unknown reason had the cmos setting to "none" in the hard drive section. If it is set to none, then change it to auto using the page up page down keys.
Good luck!
Mike
by joaye
by diskaus
by joaye
by joaye
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending