Discussion Locked

Cannot increase screen are resolution

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi,
I have 2 pc with similar problems. The drivers appear to be installed correctly. I cannot go into property settings and increase the screen are but I can change the colors,

8 replies

by sfc_gijoe

It probably only has a generic VGA driver loaded and that is why it is not showing in Device Manager as a error. Look at the video card web site for an updated driver and reinstall it.

by casemaker

Thank You, I have already done all the basics. I loaded new drivers from driver guide and the 3DLabs web site. I also tried a driver for W2K and none of them are working

by kingofthenerds

Open up your machine, take down any name
or number written on your graphics card. Go to
google and type in the name and number of
the card followed by driver

E.g. nvidia Geforce 3 322e driver

This will display a driver for your card if there is
one available.

Good luck

by casemaker

Thank You, I have already done all the basics. I loaded new drivers from driver guide and the 3DLabs web site. I also tried a driver for W2K and none of them are working

by casemaker

It is ironic that both pc's I cannot get the drivers to install are Dell and I installed new HDD in both of them. Just in case anyone has run into something similar

by brian

I dont recall Dell ever selling computers with 3DLabs video. If they did the drivers will be on their site.

It sounds like someone bought the same card and added it to both machines and now you can't get good drivers for it.

If the card has a particular chipset you can use generic drivers but they may not even work with that particular Video Card.

Whomever assembled the chips on the board - the actual card manufacturer, often requires their own modified drivers for full functionality. Many smaller companies sell the cheaper cards that may lack quality bug free drivers. Try a different video card to confirm. You may eventually find the right driver if it exists, but is it worth the time and trouble?
The software side of hardware is what makes big manufacturers hard to beat. The cost per unit for drivers is so low at a company like ATI because they sell so many cards (and most use the same driver). Buying third party cards with ATI chips doesn't guarantee full compatibilty with ATI generic drivers.

This discussion is closed to new replies.