Question Locked

Canon Starwriter Jet 300 word processor ink cartridge problem

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I've got an old Starwriter Jet 300 that was working fine until it ran out of ink. After putting in a new cartridge, I keep getting an error saying the cartridge isn't installed properly, but it clearly clicks right in to place.

Anyone have any suggestions? It's really the perfect device for my mother (computer illiterate) to use and would like to get it working again.

5 replies

by jiminpa

I would suspect that there is either a microswitch of some sort that is not being actuated, you have a faulty cartridge, the cartridge is not installed properly or the word processor itself is defective.

by Former member

Wait for at least 15 minutes before putting in the ink cartridge, when the time is up, replace the ink cartridge and restart the word processor.

Please post back if you have any more problems or questions.
If this information is useful, please mark as helpful. Thanks.

by ptm

Thank you for the suggestion, but it didn't help the problem.

by camdeeman

I have a Starwriter that is out of INk and don't know what sequence to open it.

This discussion is closed to new replies.