Discussion Locked

Can't find CD-ROM'son WIN Explorer

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have two CD-ROM's .... Both are showing in the initial startup of the computer - but not
in Windows Explorer. The lights on the CD-ROM's light up, the ROM's are not useable.
Windows 98 installed

5 replies

by thechas

First, check and see if Windows found your drives.
Right click on the My Computer Icon.
Click on properties.
Click on the device manager tab.
See if the CD rom drives show up here.
Also, look for yellow ? and !
These point to missing drivers, or related hardware problems.

Assuming that the CD drives do not show up in device manager, what you probably need is the IDE buss driver for the chipset on your mother board.

You need to either find out who made your computer / motherboard, and go to their web site, download and install the drivers for your computer.

If you cannot determine who made the motherboard, look at the large ICs solder to the motherboard.
They should have a manufactures name on them such as Intel, AMD, VIA, SiS and a series of numbers for the chip itself.
Go to the manufactures web site, and download the reference drivers for your chipset.

2 good resources to help you on your quest are:
www.motherboards.org
www.driverguide.com

by damjef

as with the previous post check your chipset drivers first, failing that i am presuming that one of your drives is a burner and its worth noting that some of the well known burning software can cause recognition problems, so it would be worth a add/remove of the burning software.(if you've had the case apart it might be worth checking the ide/scsi cables. hope this helps. can you see them in dos?

This discussion is closed to new replies.