Discussion Locked

Can't See DVD Drive in Win2K Pro

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a Dell computer (running Widows 2000 Pro) with an NEC DVD-ROM IDE drive installed. It worked great for several weeks, then all of a sudden it stopped showing up in My Computer or with NT Explorer. The System properties shows the drive, but my Computer Manager tool shows the drive with a red circle with a white X inside it. The properties screen shows that the Library for this device doesn't exist. I have tried removing it in Device Manager and restarted the PC, but it still doesn't show up. Any ideas?

Mike C.

9 replies

by dandare

see if in control panel -> system -> CDroms -> NEC DVDROM properties is checked the "remove from this hardware profile" option if it is then uncheck it.
If this doesen't help
Try to reinstall the W2K drivers for this drive manualy if id doesen't work then try to unplug it (from everything) start the computer unistall everything that has to do with the DVD drive boot again and then try to install the drive again from the begining

by mike.corson

While the information is valid, the NEC DVD does show up in System Devices just fine, and it shows that it's working properly too. It just doesn't show up in Windows Explorer or when My Computer is opened. Also, the NEC manufacturer DOES NOT provide any drivers. They say to contact the OEM vendor who says to contact NEC. I also happen to be a small OEM vendor who can't get any support from NEC.

by mike.corson

Thanks for the information. I had SP-1 already loaded, but I reloaded it again just in case and got the same results. The DVD drive shows up under Device Manager, but will not display under Windows Explorer or My COmputer.

by conrad

"It is not enough to have knowledge, one must also apply it. It is not enough to have wishes, one must also accomplish."

-- Johann Wolfgang Von Goethe (1749-1832)

by mike.corson

Thanks for the reply. I did eventually fix the problem, but it was done by changing the hard drive from a Quantum to a Western Digital HD. I had a Quantum boot drive 0 (8.2 GB) and a WDC 13.5 GB for drive D, and they don't seem to play well together. Once I swapped the drives out, the DVD showed up again. Don't know the relevance of Answer #3 though.

Thanks.

by maxwell edison

Greetings,

If it shows up in device manager but not in my computer, think that something got deleted. I'd reinstall Win 2000 Pro over itself. (Backing up my data first, of course.) That should replace any missing or corrupted files.

Good luck,

Maxwell

by mike.corson

Thanks for the reply. I did eventually fix the problem, but it was done by changing the hard drive from a Quantum to a Western Digital HD. I had a Quantum boot drive 0 (8.2 GB) and a WDC 13.5 GB for drive D, and they don't seem to play well together. Once I swapped the drives out, the DVD showed up again. Thanks.

This discussion is closed to new replies.