Discussion Locked

cd rom doesn't appear in device Manager

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
The cd rom drive (d) doesnt appear in the device manager. When i try to use it it's not ready, it's plug and play and brand new. I have a cd-r drive currently in the machine and I used to have a cd installed. all of a sudden it just stopped responding.

9 replies

by zlitocook

What O/S 95, 98, me ect. Did you remove the cdrom in the device manager? Try that and rebooting to see if it see's the cdr. If not you should have received a floppy or cd with the new drive. Try opening it in explore and clicking on the install. If it's a cd it should self start. And there should be a diagnostic included with it or at it's web site.

by walter_loh

1. Run msconfig check if the cdrom mscdex command are rem in auto and config
Or
1. Try to install the dos driver given
0r
1. Goto safe mode remove all crom in device manager
2. Try to install the dos driver given
or
1. Goto safe mode remove all crom in device
2. Try to install the dos driver given
3. Check the cdr drive setting

by hamiltonreps9aa

Check your ide ports in hardware and software (device mgr)..If there is a problem there you won't see the cd drive.

by bazzainuk

does it show up in bios apon start up if not you will have to make sure your jumpers are set up Eg. as a master or slave etc then go into bios you may have harddisc auto dectect which will autodetect all ide devices, If when they are detected and you dont see them in windows update your ide & chipset drivers

This discussion is closed to new replies.