Discussion Locked

cd-rom driver HELLLLLLLLP!!!!!!

0 helpful
13 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

How do you install the cd-rom drivers for a laptop without an operating system on the hard drive??

The only thing on the hard drive is a Master Boot Record!!!!

13 replies

by deane

You must have an operating system. Simply use a Win98 recover disk to boot the laptop and a Drive D: will be available for you to
access the CDROM. Best to load the operating system and let Win98 install itself.

by berserker

The easiest way is to create a Windows 98 startup disk. Ask your computer supplier or a friend to make startup disk/bootdisk at the Settings/Control Panel/Add/Remove Program and the tab startup Disk. You will need one blank diskette to create the disk. After you have the startup disk, make sure you have allowed the computer to boot the laptop using A:\ in the BIOS. When the systems is booting from the startup disk in A:\, you can select option 1 which says Booting the Computer with CD-ROM support.

by bill cassada

If you have a floppy drive, set the BIOS to boot from that and follow the suggestion above. If not, set the BIOS to boot from CD-ROM and boot the operating system CD that way. The Win98 CD will give you the option of booting with or without CD-ROM support, boot it WITH support and should can then remove the CD and use another one, if you wish.

by bionicdog

i think you should accquire a Windows98 boot-up disk and insert it into the floppy drive and restart your machine and then go into bios setup and make sure that your first boot-up option is from the A drive then the floppy disk is read, it will ask you to select to choose on of three options but you will select the 2nd option(i.e boot with CD-ROM support) and this loads generic drivers so that you can be able to have some use of the cd-rom drive during the installation of windows, after that goahead and load windows.

by thejrc

well everybody has the most common answer pretty much covered!! I see two more options that I find much easier :::well ones easier anyways::: but then again I load the impossible all day everyday. Option one is to make a bootdisk much like the win98 but you can custom tailor it. My bootdisk loads the most generic and common cd drivers :::mitsumi, available from their site, it'll load pretty much any cd with the exception of specialty cd's like pcmcia or compaq's pd/cd.. you dont see em anyways::: I also throw the utilities from win95's c:\windows\command directory, this is pretty much putting dos 7.0 on a floppy complete with cd drivers, from there you can do fat32 partitions, format, and everything else you do in dosmode of your 95/98 machines. the other way is to get an adapter, and string it up as a slave on your desktop :::go with the 98 cd idea or the custom bootdisk trust me:::

by rgravelle

use sys c: command on windows boot disk.
then copy config.sys and autoexec.bat
to your root directory.You will then have
to use edit at the dos prompt to delete
some of the information in config.sys and
autoexec.bat so that only lines associated
with your cd are kept.

This discussion is closed to new replies.