Discussion Locked

CDRW - "No Disk Found" "Not Ready"

0 helpful
11 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi,

I have 2 unrelated PCs:

1. Compaq, WinXP, don't know about the CDRW.
See's data already on disks but will not recognize blank media inserted into drive. Error = "Disk Not Ready" and "No Disk In Drive".

2. Built PC, Win98SE, Sony CRX220E1 CDRW.
I reloaded the Windows generic driver and it sees CD-Rs with data, but not CDRW's. Same message.

Any ideas on what causes this error and how to correct it? If it sees CDR and CSRW, could it be the driver?

Thanks,

Tom

11 replies

by thechas

If the CD-RW disk was formatted for any CD software other than Direct-CD (Roxio), XP may not be able to see the disk.
The built-in CD software in XP is based on the code for Easy CD Creator.

On the Windows 98 system, you MUST install the proper software to read CD-RW disks.
Windows 98 has no native capability for CD-RW reading or recording.

CD-RW disks recorded with Nero In-CD may not be able to be read on a system that has Roxio Direct CD installed.

Chas

by willcomp

Chas is correct up to a point. If Win XP PC will not recognize blank media (assume these are unused CD-R and CD-RW discs), drive may be faulty. Win XP burning software will handle both R and RW media.

Dalton

by nic_g

It might be worth trying a different disk make, i have experanced the same problems before and it turned out the writer just didn't like the type of media.

If you are using an unbranded media try a branded one such as TDK.

by plynn

Be sure to download the latest drivers for your CDRW from the manufacturer web site.

It may not be a software problem. It may be the CDRW Drive itself. When they first came out, they were made in several different formats. The most common were "CDRW -" & "CDRW +", which means that you had to buy that type of disk for the one you have.

I have a Sony DRU 510A & it will read/write both types of formats. Check your model to find out what yours is capable of.

Another possiblity is the age of your CDRW disks. I bought some at a moving sale, but found out that they were for 1X, 2X or 4X speed drives. I got the same message as you. The CD's have to be reformatted for use with my newer drive, yet about 50% of them say they are now formatted, but still won't work. In that case, I reformatted them on an older drive & they seem to work. The computer with the older CDRW can read & write to them, but that doesn't mean other CDRW's will be able to. *sigh*

by kingtas

On the built machine with Win98 and Sony CDRW, I found the original software and reloaded with drivers and Nero. It now works fine. Adaptic CDwriter failed to make it function - so I'm guesing it was the drivers.

I don't have the drivers for the other XP machine but since it's XP, I'll just load Nero and see what happens. If not, I'll have to pull out the CDRW to see what I can find out about brand and model number to download srivers.

Thanks to all who responded.

This discussion is closed to new replies.