5 replies
by kdurichek
Do you have the operating cd's? If you do all you need to do is put cd in drive and boot to it. If setup doesn't start you might have to go in CMOS and make it boot to cd-rom first. Some machines use f2, some delete. It usually tells you what to push to go into setup when booting up. It will probably ask you to format drive, usually by pressing enter in setup program. I have tried to load ME over 98 before and it usually asks to format, because they are different. Read the instructions on screen and just go by the prompts. REMEMBER everything on drive will be lost so you will have reinstall all your programs.
The only problem I see is that I have had some of the newer machines would not load 98SE right if it had ME on it before, but that only happens occasionally.
I hope that helps you.
Allen
by phillipalvey
by grump
Note: When you install 98 on you wife's system. 98 may not support all the hardware and you will have to download correct drivers for the devicees. Like wise you may have to download ME drivers for devices when you install ME on you computer..
That said lets start with you wife's system..
Put the 98 CD in her computer and turn it off. Turn it on and see if the system boots from the CD. If it does , format the hard drive and reboot the computer from the CD and pick the option to install windows..
If you are successful whith her computer..Do the same to your's using the Windows ME CD..
If you computer will not boot form CD, then create a boot diskette form your computer with win98. boot what ever computer and format the hard drive.. Use the boot disk to load cdrom drivers and the use CD to install what ever windows verison..
by phillipalvey
by phillipalvey
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending