7 replies
It could be the battery . . .If it is you
will find that the date, time and drive
settings will be all wrong. I also ran into
it once when I added an ide zip drive. It
thought it was one of the 120 floppy drives.
Go to the motherboards site an see if you
have the latest bios.
by craigrogerl
by abi9999
This issue can be caused by any of the following:1.Incorrectly configured CMOS settings 2.Disconnecting power from computer without shutting down computer
Attempt to reboot the computer. If error still occurs after rebooting the computer enter CMOS setup and check all values. If you have cleared and or flashed the BIOS ensure that the time and date are set correctly then save changes and reboot.
If you have a Phoenix BIOS and have an option for 'Reset Configuration Data', set this value to 'Yes' and save and exit the CMOS.
If disconnecting the power from the computer while still operational this could cause the CMOS to become corrupt. Ensure that the computer is ready to be shut off before turning off the computer. It can be dueto BAD RAM also. Check for any BIOS update.
by craigrogerl
by craigrogerl
by craigrogerl
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending