Discussion Locked

COM PORT PROBLEMS NT SERVER 4.0

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

THE CONTROL REGISTER FOR COM PORT 1 OVERLAPS WITH THE CONTROL REGISTER FOR COM PORT 3. CHECKPOINT FIREWALL IS NOT INSTALLED. HOW DO YOU RECONFIGURE THE COM PORTS? DO YOU HAVE TO REINSTALL THE OPERATING SYSTEM OR IS THERE ANOTHER WAY TO FIX THIS?
PLEASE HELP

THANKS!!!!!!!!!!!!!!!!!!

6 replies

by tigre_269

To configure the COM ports in NT, go into Control Panel, Ports. Select the COM port you want to configure, then choose settings. There is also an Avanced button for changing the Base I/O and IRQ. Hope this helps.

by stuff

First STOP SHOUTING.

I had the above issue once installing Sygate, I did exactly what Kalvi is suggesting, I think I checked what port the modem was configured to and removed the other one. It worked fine after that.

FYI Standard settings

COM IRQ I/O Base
1 4 3Fh
2 3 2Fh
3 4 3Eh
4 3 2Eh

I wish you success

Chris

This discussion is closed to new replies.