First thing to try is loosening the Screws that hold the Motherboard to the Case. They will only need a full turn. Reconnect the Power and turn it on. If it powers up shut it down and retighten the screws. They only need to be firm.
Make sure that there are no loose screws or other components inside the case. These can cause shorts and other serious problems with the PC.
Also check the power outlet that you are connected to by plugging in something else and turning it on.
A faulty (PSU) Power Supply Unit can also cause it. Fluctuating power or an underpowered PSU is not good for the Motherboard. You should be running 500-600 Watts. Try another one if available or replace it.
If it's none of the above try this Bench Test.
Carefully remove everything from the Motherboard. Remove the Motherboard and put it on an anti-static mat on a bench. Check the mounting stands and make sure that they line up with the holes on the Motherboard and they are all of the same height, so they are not shorting out the Motheboard. Remove the Power Supply if it is a known working one to test with. Remove the Heatsink and give it a good clean. Remove the CPU and reseat it. Reinstall the Heatsink remembering to use CPU grease. Reseat the RAM and test with one stick at a time. Connect a hard drive and the Video Card. Connect the Power supply to the Motherboard. You can use a flat blade Screwdriver to short the Power pins on the Motherboard if you haven't got a spare switch. Connect the Monitor and turn it on and see what happens. If it stars up add one Device at a time to test it.
Troubleshooting Flowchart
http://www.fixingmycomputer.com/flowcharts/boot-up-flowchart.html