3 replies
by thechas
If the PC shuts down before even starting the POST process, then there are 2 prime suspects:
1. The PC health status is reading either no CPU fan, or a bad CPU core voltage.
You might be able to get past this by clearing the CMOS for at least 1 boot.
2. The motherboard is NOT returning the power supply good signal to the power supply.
This could be from a motherboard problem, or a power supply problem.
Either swap in a known good power supply, or use a power supply test load to check the power supply.
A bad CPU can also cause this.
Chas
by thechas
Sorry for the double post.
I got an error message the first time I submitted the post.
Chas
by thechas
If the PC shuts down before even starting the POST process, then there are 2 prime suspects:
1. The PC health status is reading either no CPU fan, or a bad CPU core voltage.
You might be able to get past this by clearing the CMOS for at least 1 boot.
2. The motherboard is NOT returning the power supply good signal to the power supply.
This could be from a motherboard problem, or a power supply problem.
Either swap in a known good power supply, or use a power supply test load to check the power supply.
A bad CPU can also cause this.
Chas
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending