Discussion Locked

Computer w/ win98 loses connection to ne

0 helpful
11 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hello:
On our Win 2000 domain, I have a Compaq Celerom 300 with a Dlink 550 network card running the first edition of Win98 with critical updates installed. From two different network drops using different network cable and user accounts, the workstation loses its' connection to the network overnight. Both user accounts are members of the domain users group. Error messages are usually like resource not found when a network resource is clicked on or it can't find the Microsoft Mail Post Office that is on the domain controller. The worst symptom is an inability to print to a printer connected to a Win NT station. A reboot takes care of the problem, but the users are helicopter pilots who need a reliable workstation that stays on the networkfor Internet access and printing.

I have tried a different card, different user account, and different network drop.

No other workstations have shown these symtoms and the problem one only does so occasionally, once every 3 to 4 weeks, although now it happens more frequently after sitting with no activity for a night or weekend.

I have turned off all power saving features, and scheduled jobs to run overnight (except a required backup job). I ahve also uninstalled all network software when I installed the new card in a different PCMCIA slot.

Other things I will do are use a USB card and update the BIOS and OS to Win 98 SE.

One new situation that ahappened this morning due to the recreation of a share on the problem workstation. The backup server was mapped to a non - existant share and it paused trying to conect to the problem workstation. The problem workstation would get a "No Permission to Access Server" message when accessing the server even on reboot.

11 replies

by leirags

Let me tell you some situations i like be clear, if you not have multihomed LAN, and not have this problems with other machines, then...

One think you don like to ear

Change the MOTHERBOARD....

Yes i have some problems like you and even after 3 months the machine not like install office...

by rainnie1

Thanks for the answer. I hope I don't have to resort to a new motherboard. I will check with Compaq and see what warantty there is. The problem has changed slightly. Essentially, the computer will lose connection with the domain controller and receive access denied trying to access any shares on the server. The w/s can still see other shares on the network (both win 9x and win nt shares) Upon reboot, the workstation can see the DC again. But after a few hours (although not every time) it losescontact with it. The situation is helped by keeping a directory open on the server which prevents the "access denied" messages. I have upgraded to Win 98 SE (not to a different directory as I wanted to see what it would do ) which seemed to work fora few days, but the problem came back. I tried using a USB card after the upgrade, but I couldn't get it to work , so I went back to use the old dlink card I had in there. I also specifically added the user account to rights to the netlogon. I am going to apply some BIOS flashes and do a fresh install of Win NT 4.0. The computer has frozen twice in the morning which has furstrated the pilots so the computer is getting passed on to the front desk receptionist.

For what its worth, the user account had a blank password (bad security , I know) which I don't know if thast would cause problems).

Also the previous user , who used the computer for 1.5 years would experience infrequent hangs (once every 2 months in Word) when working with documents on the network) and also have lost access to the network (infrequently) during the night, by having access to shares denied and getting propted to locate Microsoft Mail post office.They had a password that was not blank..

by popovo

All these symptoms lead to one thing - hardware problem. Instable hardware problem (could be in relation to any power supply sourse)- to solve this you need time and new main hardware (since you had work over network card). Yes, could be motherboard.

by rainnie1

Thanks for the answer. I hope I don't have to resort to a new motherboard or power source. I will check with Compaq and see what warantty there is. The problem has changed slightly. Essentially, the computer will lose connection with the domain controller and receive access denied trying to access any shares on the server. The w/s can still see other shares on the network (both win 9x and win nt shares) Upon reboot, the workstation can see the DC again. But after a few hours (although not everytime) it loses contact with it. The situation is helped by keeping a directory open on the server which prevents the "access denied" messages. I have upgraded to Win 98 SE (not to a different directory as I wanted to see what it would do ) which seemed to work for a few days, but the problem came back. I tried using a USB card after the upgrade, but I couldn't get it to work , so I went back to use the old dlink card I had in there. I also specifically added the user account to rights to the netlogon. I am going to apply some BIOS flashes and do a fresh install of Win NT 4.0. The computer has frozen twice in the morning which has furstrated the pilots so the computer is getting passed on to the front desk receptionist.

For what its worth, the user account had a blank password (bad security , I know) which I don't know if thast would cause problems).

Also the previous user , who used the computer for 1.5 years would experience infrequent hangs (once every 2 months in Word) whenworking with documents on the network) and also have lost access to the network (infrequently) during the night, by having access to shares denied and getting propted to locate Microsoft Mail post office.They had a password that was not blank..

by curacao_dejavu

This is a OS problem, not a hardware problem, it happens a lot with win9x pc's.
I mailed you the steps to resolved this.
Also update the networkdrivers.

regards,

Leopold

by rainnie1

Thanks for the answer. I checked your steps, but it was talking about Win ME, so I did not apply the patch. But I appreciate the checklist. I did update the DLink 550 drivers which made no difference.
The problem has changed slightly. Essentially,the computer will lose connection with the domain controller and receive access denied trying to access any shares on the server. The w/s can still see other shares on the network (both win 9x and win nt shares) Upon reboot, the workstation can see the DC again. But after a few hours (although not every time) it loses contact with it. The situation is helped by keeping a directory open on the server which prevents the "access denied" messages. I have upgraded to Win 98 SE (not to a different directory as I wanted to see what it would do ) which seemed to work for a few days, but the problem came back. I tried using a USB card after the upgrade, but I couldn't get it to work , so I went back to use the old dlink card I had in there. I also specifically added the user account to rights to the netlogon. I am going to apply some BIOS flashes and do a fresh install of Win NT 4.0. The computer has frozen twice in the morning which has furstrated the pilots so the computer is getting passedon to the front desk receptionist.

For what its worth, the user account had a blank password (bad security , I know) which I don't know if thast would cause problems).

Also the previous user , who used the computer for 1.5 years would experience infrequent hangs (once every 2 months in Word) when working with documents on the network) and also have lost access to the network (infrequently) during the night, by having access to shares denied and getting propted to locate Microsoft Mail post office.They had a password that was not blank..

by paul d. masley

This appears to be one of two things. Both, you do not want to hear. First, you may have an intermittent power problem. IE bad solder joint in the power supply that is loosing contact upon heatup and cooldown,

OR

You have a bad connectionon your m/b. This could be anything from a card going bad to the fan slowing down that cools the cpu. My main check would be cards and the slots that connect them to the board.

I would bring this workstation down (give the user a temp) remove all unnecessary items (sound, network, modem,) leaving only the hardrive, cd, floppy, and video and see it the result is the same. If so, do more eliminating to the point that only the hardrive and video is there. Once there, it is only one of four items causing the problem.

It is doubtful that 98A is causing this, however, you may want to do a fresh overwrite of 98SE. A fresh overwrite is removing the contents of the windows directory, but leaving the Inf directory.

Do not just do an upgrade. A clean install is better as you get rid of the old files that can cause later problems.

Paul.

by rainnie1

Thanks for the answer. I hope I don't have to resort to a new motherboard. I will check with Compaq and see what warantty there is. The problem has changed slightly. Essentially, the computer will lose connection with the domain controller and receive access denied trying to access any shares on the server. The w/s can still see other shares on the network (both win 9x and win nt shares) Upon reboot, the workstation can see the DC again. But after a few hours (although not every time) it loses contact with it. The situation is helped by keeping a directory open on the server which prevents the "access denied" messages. I have upgraded to Win 98 SE (not to a different directory as I wanted to see what it would do ) which seemed to work for a few days, but the problem came back. I tried using a USB card after the upgrade, but I couldn't get it to work , so I went back to use the old dlink card I had in there. I also specifically added the user account to rights to the netlogon. I am going to apply some BIOS flashes and do a fresh install of Win NT 4.0. The computer has frozen twice in the morning which has furstrated the pilots so the computer is getting passed on to the front desk receptionist.

For what its worth, the user account had a blank password (bad security , I know) which I don't know if thast would cause problems).

Also the previous user , who used the computer for 1.5 years would experience infrequent hangs (once every 2 months in Word) when working with documents on the network) and also have lost access to the network (infrequently) during the night, by having access to shares denied and getting propted to locate Microsoft Mail post office.They had a password that was not blank..

by geek2d

We had something similure here with a machine that was to run an email check evrey few minutes and would for no reason drop its connection. we switched it to 2000 and havnt had one problem out of it since. something to think about

This discussion is closed to new replies.