Question Locked

connecting two computers

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

hey guys...

hey guys its me again...i need your help...

"how to connect two computers using only one cable?we are assigned to connect two computers in direct connection using only one cable...

please help me...

3 replies

by dan.cox

If you want to use a network cable you need a crossover.
Not a straight through or patch cable.
When connecting like devices use a cross over cable.
Then, ensure both computers are set with an IP address on the same subnet.
For example.
Computer 1:
IP: 192.168.10.1
Subnet Mask: 255.255.255.0
Computer 2:
IP: 192.168.10.2
Subnet Mask: 255.255.255.0
Then if you have shares you should be able to connect to the shares on the other computer.
\\ComputerName\Sharename.
Let me know if this works and if there is anything else.

by hidden208

hey dude!! if you are not aware about the cross and straight throug connection, then you might have a problem. the only thing that your two pc stablish is have a cross over connection. or buy some cable that has a cross over connection, then make it sure that you do have, both on your pc have a NIC.

This discussion is closed to new replies.