Discussion Locked

Crashes 3-15 mins into games

0 helpful
17 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I wasn't sure where to put this so i uhh.. put it here. OK, well the problem is that while playing 3d intense games (doom 3 even the much older hitman 2) i can play for a few minuets then my computer freezes with a sound loop. Some times ill get this BSOD "STOP: 0x0000009C (0x00000004, 0x00000000, 0xb2000000, 0x00020151)
"MACHINE_CHECK_EXCEPTION"" but often its just the freeze and sound loop. i read on the error at Microsoft and it said it could be bad pws, bad memory, or a bad card. Well I'm running a 300watt pws when my board says it needs a 350min. That COULD be it BUT.. in my bios i stumbled across the AGP aperture setting (32 64 128 256) default is 64. When i set it to 128 i can play a game for about 3 mins then i get the freeze. At 64 i can play for 15 mins then freeze. memory problem? nope, i ran memtest86 for 46 minuets straight and completed the test 6 times with 0 errors. also i ran a few memory benchmarking programs to see if i could stress the ram and cause an error, but i didn't get one. Also i ran the probe tool that came with my mobo and logged the temp of my cup. It's usually about 117-120 F when i get a crash so i don't think thats it. And my system is 100% stock! no OCing.
The big bottle neck i have on my computer is my >PCI< geforce fx5600. But even with this sub par card i can run doom at 40-50fps at low quality and hitman mid quality at 90. also have the latest drivers, have tryed uninstalling/reinstalling drivers and tryed Directx 9.0A B and C (in order heh)
PLEASE HELP ME!!!

asus k8v
amd athlon 3200+ 64bit
512ddr 400

17 replies

by hrhold1

just acouple of thoughts:
(1) if the graphics card has a fan - is it working? regardless of your PC temp, a video card can overheat and not raise the temp of the PC/CPU
(2)you have a PCI vid card, why even set the AGP aperture.. disable the AGP port ,if possible, on the MoBo the stop any conflicts. The BIOS may have a 'primary video' choice, set it to PCI if you are able to do so in the BIOS.

good luck, hope this helps ...H

by kero

I cant disable the agp. I can set pci as primary (witch i have set right now) and the apeture has no off setting. 32,64,128,256. also i just upated my bios was playing doom 3 for maybe an hour or so and i eventually got the freeze. the reason i could play for so long was because when ever a new level loads its seems to reset my "timer" i blew threw 4 or 5 levels and in turn it flushed my textures each time (i assume) but the last one i played for about 25 mins and it crashed. and yes my card has a fan on it and its working. i also tryed aiming an 80mm at it with the case open just to see what would happen.. same problem. I think i get the crash when my card runs out of space and trys to use the system ram to store textures. friend is giving me an AGP card on sat and i HOPE HOPE HOPE that maybe its a problem that happens when the PCI cards wants access to the ram and will be gone if i get an AGP. If anyone has any other ideas im willing to try anything short of formating (just formated 3 nights ago because i wanted a clean install for my new ram/mobo/cpu)

by dmiles

An often-overlooked aspect of graphics performance and stability is the power supply. Most modern graphics cards require a stable source of power, and your Power Supply Unit (PSU) has the main job of providing this to all the components in your system. If you're not using a good PSU, you will have problems running your games with any stability

As a rule of thumb, I recommend at least a 350W power supply for modern PCs. However as soon as you attach several optical drives, hard drives, case fans and various USB devices for example you will find even 350W may not be enough when combined with a power-hungry CPU and graphics card.

The second, and more important, but lesser known aspect of a PSU is the stability of the voltages along the +12V, +5V and +3.3V rails. That is, how close is the actual voltage being supplied to your components on these rails to the advertised requirements (i.e. 12V, 5V and 3.3V). The most accurate way to check this is to use a voltmeter, but that requires the right equipment and a bit of technical expertise. The common way for most people is to use some sort of monitoring software.

If you can't find any such software, there is a generic motherboard monitoring utility called Motherboard Monitor which runs on any brand of motherboard, and when set up correctly measures fan speeds and voltages. It is safe, free and reliable to use.

by brddog

Sounds like a video problem, see the mins from doom 3 site. Also what os are you running as this game is only written for 2000/XP

# 3D Hardware Accelerator Card Required - 100% DirectX? 9.0b compatible 64MB Hardware Accelerated video card and the latest drivers*.
# English version of Microsoft? Windows? 2000/XP
# Pentium? IV 1.5 GHz or Athlon? XP 1500+ processor or higher
# 384MB RAM
# 8x Speed CD-ROM drive (1200KB/sec sustained transfer rate) and latest drivers
# 2.2GB of uncompressed free hard disk space (plus 400MB for Windows? swap file)
# 100% DirectX? 9.0b compatible 16-bit sound card and latest drivers
# 100% Windows? 2000/XP compatible mouse, keyboard and latest drivers
# DirectX? 9.0b (included)

by cg it

to add to everyone elses, suggestions, one that wasn't mentioned was sound. Your sound card drivers might be causing the BSOD.

Further, its almost a given that gamers overclock. If you overclock your system for performance e.g. vid card or processor, you will cause your system to become unstable which would lead to a BSOD.

by cp7212

My friend had crash problems with Doom 3, also. He wound up trying various vid cards and had to get a 256 MB card to get it to run right. Usually, I don't go by minimum requirements for software. I try to go with the recommended.

by willcomp

Although not a gamer, I build high end systems and subscribe to Maximum PC because they tend to be on the bleeding edge and have more useful how-to and Q&A sections.

The tech gurus at Maximum PC harp on power supplies constantly. They recommend a quality 400 watt PSU as a minimum for serious gaming.

I have not seen any problems on loaded systems with quality (Antec, Enermax, ThermalTake, etc.) 350 watt or higher PSUs.

In other words, you need a new, better power supply anyway, so go ahead and replace it and then see what happens.

Answer above from DMiles is on target in my opinion.

Dalton

by kero

well my first though was a shotty PWS. But i figured that cant be it because of the extended game play i get when adjusting the apeture size and the fact that if the game levels change fast enough (more loading/unloading of textures) i can play for quite some time. by the way

+12v = 11.776
+5v = 5.053
+3v = 3.28
vcore = 1.502

also i have never OCed this sytem GPU/CPU/DDR RAM are all stock clock speeds. I need a new PWS anyways but my checks are few and far between so i didnt wanna spend $50-60 if i would end up needing a new vid card anyways. i dont have any geek friends that live by me so i cant borrow one to try it out. =/ Thx for the continued support!

by chud

I've come across this sort of problem myself and found that in my case I could workaround it by not using Hardware EAX on my soundcard (Audigy) - with Hardware EAX enabled I was getting exactly the same sort of problem you've described (unrecoverable screen freeze with sound loop).

This discussion is closed to new replies.