Discussion Locked

Data CD's I create won't read in a Compu

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a HP CDWRITER Plus Model 9300i. I have created many data CD's using Adaptec Easy CD Creator and they work fine in my machine. I tried to give a friend one with data on it but her machine thinks it is an Audio CD and will not open it up to allow her to get data from it. Other machines can read it. Any suggestion's would be helpful. Thanks

6 replies

by jmar17

There are some CD-ROMs that will not be able to read the data CD that you created. In order for your friend's machine to read it, the machine needs to have a program that will allow the CD-ROM to read the data on the CD. One such program is UDF Reader that came along with my Adaptec Easy CD Creator. If you have that program on the CD creating software, then install the reader on your friend's computer. Then the machine should be able to read your CD. Good luck!

by fletch

I found the program on my Easy CD, will try to install it on her machine and see if it works. Thanks

by wizstorm

Hi, I had the same problem a while ago.
I found out that most of the old CD-ROM's don't read cd-recordebles

by clover252525

Are you writing to a re-writable disk? Normal CD-s can't read re-writable disks. Try writing to a normal write-once-only disk and your friend should be able to read it.

clover

This discussion is closed to new replies.