9 replies
by joeysitaliangirl Accepted solution
by oh smeg Accepted solution
That the M'Board of the Dell is broken where you connect the Power Adaptor. When this happens you are unable to charge the NB or run the Computer, sometimes you can mess around and get it working but the moment that the unit is moved or even the power lead it will stop charging. If the socket in the NB is completely broken out it can short out destroying the Adaptor but to be completely sure you need to check the adaptor with a Multimeter for voltage at the Plug into the NB and maybe a blown fuse.
It is possible to mount a remote Socket on a Fly Lead but you need to have the right tools and know how to use a Electronics Soldering Iron or you will most likely destroy the M'Board. You also need to remove the M'Board from the NB to do this so you need to be able to do this in a Static Safe Work Area.
I would suggest if you don't have the tools that you take it to a Repairer for a look see to tell what can be done.
Col
by joeysitaliangirl Accepted solution
The Ac Adaptor now that i have is completely broken doesnt work.,I tryed it in my brothers dell laptop.
So if its the M"Board. do u know how much something like that would cost to get fixed and Does that erase the hard drive with all my stuff on it?
by cbalness Accepted solution
Dependant on the age of the laptop some had "modular" boards in that the motherboard was composed of multiple smaller boards.
Say 1 would house the Processor and Grapics Processor, another the northbridge and southbridge chips and 1 the powerplugins and stuff.
A shop I worked in had that exact issue, they blew the board the ac-dc plugs into. They received a new part, tech wasn't paying attention, replaced part and plugged it in and blew the new one as well.
Hopefully it's just the one board.
by oh smeg Accepted solution
It's the adaptor that is shot. Have you tried using your brothers Adaptor in your NB? Here I'm assuming that they are the same Model. If they are not you need to look at the plug that goes into the NB and make sure that they are the same size. Both the Outside of the Plug & the Hole down the Middle of it. If the hole is bigger the plug will not be making Contact and as a result will not charge.
If that works all you need do is buy a new Mains Adaptor.Of course if the NB's M'Board is damaged you may destroy the Mains Adaptor.
AS far as replacing the M'Board is concerned no it doesn't trash your DATA but the Tech doing the work may reimage the drive and destroy your data. As for cost it's not cheap but you need to ask around your local area for this as prices vary across the world.
Col
by briosucks Accepted solution
by maniacman Accepted solution
by boxfiddler Hot topic Accepted solution
that signifies it is on? If so, have you cleaned the battery connectors lately? (Connectors not the right word but for the life of me I can't find it in my brain right now.)
If the place/s where the battery meets the motherboard for the transfer of power that charges the battery are dirty, the battery won't charge.
Just a thought, and thanks to Tigger Two for pointing it out to me eons ago!
by luther.laine Accepted solution
Found the following page while looking for my own adapter issues, hope it might be useful for your problem;
http://support.dell.com/support/topics/global.aspx/support/adapter_recall/adapter_recall?c=us&l=en&s=gen
...or google 'power adapter overheats', third search listing down.
Good luck with your adapter!
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending