Discussion Locked

Faulty Autoexec.bat

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

When I bootup Win '98 the process stops shortly after commencing.
The contents of the autoexec.bat file is displayed followed by the C:\ prompt.
I then have to type "win" and hit Enter to continue loading windows.
The problem started after I installed some new software (Norton SystemWorks)

Please advise

5 replies

by syscokid

You probably need to edit your MSDOS.SYS file to have a line that says BootGui=1. It's probably set to BootGUI=0 now. Edit MSDOS.SYS, look for BootGUI= and make it 1.

These instructions for editing MSDOS.SYS are from
http://support.microsoft.com/support/kb/articles/Q118/5/79.asp (no spaces)

How to Edit the Msdos.sys File
If you want to change any of the values in the Msdos.sys file, follow these steps to edit the file:
Click Start, point to Find, and then click Files Or Folders.In the Named box, type msdos.sys. In the Look In box, click your boot drive (usually drive C, or drive H if drive C is compressed). Click the Find Now button.

Right-click the Msdos.sys file, and then click Properties.

Click to clear the Read-Only and Hidden check boxes to remove these attributes from the Msdos.sys file, and then click OK.

Right-click the Msdos.sys file, and then click Open With.

In the Choose the program you want to use box, click WordPad, and then click OK.Make the changes you want to the Msdos.sys file. When you are done, save the file as a text document, and then quit WordPad.

Right-click the Msdos.sys file, and then click Properties.

Select the Read-Only and Hidden check boxes to set the attributes for the file, and then click OK. Close the Find window.

Restart Windows.

by the gun doctor

Unless you have some older DOS drivers loading from your autoexec.bat you don't even need it in WIN98. At the run command type "msconfig" and on the general tab click "Selective startup" and uncheck "Process autoexec.bat file". This should help youout.

Scott

by bryanmorison

Thanx, that also helped.
I used the msconfig trick (uncheck autoexec.bat)
So what purpose does autoexec.bat actually serve then?

This discussion is closed to new replies.