Discussion Locked

Favorite user stories for 2004

0 helpful
296 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
We are about to close 2004 and I need to hear your best or worst user stories. These can be a great help when the job is getting the best of you. Just by reading about how some one ether made your day or just shut the IIS server down, can make others smile or just shake their heads and say I know the feeling. Just let me know the best or worst user and I will share mine too.

296 replies

by bfilmfan

In keeping with Department of Defense policy on maintaining security, a user reported that his hard disk was no longer able to be read to be wiped. When the help desk called me for advice on how to handle the issue, I informed them policy required the hard disk to be destroyed and proof provided to the security officers.
So around 3 o'clock there was a request that I and one of the security officers stop by the motor pool.
Once at the pool, the user walked over with a plastic bag that was fileld with small bits of metal. Asking what this was, he replied, "That hard disk I called you about."
I asked, "What happened?"
He said, "Well you said to destroy it, so I had a tank run over it about 3 times."
I collected the bagged remains where they were later enshrined in a case on the director's wall as an example to not speak too literally to users....

by trockii

I had things like that happen all the time while I was active duty with the Air Force. We take forgranted that they will know what we mean when we say "destroy" or "zerorize".

by jamesrl

We used to physically destroy, but not with tanks.

It used to be a job for the night shift when they got bored, or any of us when we needed to vent.

We would take them apart, put on the safety glasses and smash platters. If you mix them with enough other platters and smash them thoroughly enough, no one can put them back. This is after using a wiping tool. You like to be thorough when nuclear information is involved.

James

by zlitocook

Way to destroy a drive, I work at a bank and had alot of drives that were special. Like ones that had two or three cables connected to them. There is no easy way to remove data from them. On day I was on the back lot with a two pound hammer bashing a hard drive. And a person from accounting was watching me and asked if she could take a few hits. And after that I get requests to destroy computer stuff every day. It makes them feel better.

by xtrainer

I've seen old cars and pianos demolished at a dollar a bash. Next time you need an idea for a charity fund raiser, donate an old computer. I can't think of anyone who wouldn't enjoy taking a hammer to a PC!

by johnm

I had the opposite problem in the Navy. The Intel center was upgrading from a word-processing system to a computer system with wordprocessing capabilities. The original system had a magnetic drum storage and the techs had managed to erase the timing tracks before they did the data tracks. You could never certify that the data had been really cleaned off. Regulations required that the equipment be sent out to be reused. When I demanded a storage/recycling site that was cleared for the highest level that might still be on the drum, I finally got approval for destroying the drum. The next Emergency Destruction training day it got about six thermite grenades and two types of thermite slabs, then was dumped into an oil drum with a load of paper and went through a complete burn cycle. It looked pretty well zeroized after that.

by gwiggs

We used to use 21 inch platters with our mainframes in the Air Force. Working in computer support, we were required to use a power sander to clean all 'silica' off of the platters, only when all the brown stuff was off. When the electric sander broke, we had to use a sanding block and do it manually.

by owen

I got buddy an XP2600 chip. He had problems with the ZIF lever on his mobo. Took a SCREWdriver to it and scratched the mobo. My good friend Jeff offered to try and fix the mobo. While he's got the mobo on his worktable he cleans up his shop and takes buddy's case to the dump. So all buddy has left is the chip. That cost me money.

by scottsman

I had a director demand that we give him static passwords as he was tired of having to write the new passwords down on sticky notes. An attempt to explain the security dangers of 1. static passwords and 2. sticky notes on his monitor was severly rebuffed. I cannot repeat the language that he used.
Oh and what position did this director hold? Director of security of course.

My first reaction was to use his access to the budget to take a vacation, plane tickets and a 5 star hotel all on the government...but I am too pretty for jail and he still would denamd a static password.

by bfilmfan

Usually a nice phone call from a phone booth to the FBI and NSA gets rids of these kinds of idiots. Never use your name, but just relate what is going on.

Something to keep in mind if you ever run into this again...

by zlitocook

A director of MIS who desided that she would keep all her passwords on her and wanted to encrypt them so no one else could read them. This was a Windows 98 network with NT servers a few years ago. So I bought software to encrypt files and other things, it cost $15.000 and was a good buy at the time. When I told her she had to use a password to access the folder she was keeping her passwords in she said I will just use the password file with out the software. :)

by yelt62

When I was leading up the project to migrate to W2K I wanted to test the executives accounts to make sure the migration went well. Guess what, my VP's password was his userid. Of course,I logged off immediately. Know how well our security folks do their job.

Rb

by featherman

In a "former life" so to speak, as a Help Desk representative for a major system component manufacturer, I had occasion to deal with Sys Admins / Net Admins / Storage Admins form various small and large IT shops. One call concerned our hardware and the software used to administer storage volumes attached to it. In order to set a given configuration into hardware, a reboot of the system, and removal of attached devices was required. No amount of rebooting (or any other documented or semi-documented tricks, for that matter) would get this hardware to perform as expected. Running some internal diagnostics indicated that our controller was working fine.

The customer elected to call me back the next day, as his schedule did not permit him to continue the support call... Well, he did, and this time with the VAR who sold him the original system present. The VAR and I discussed what we had done (on speakerphone, whith the end user present), and the VAR had the user re-try what we had discussed earlier. As soon as the user shut down the system and attempted to remove the devices, a shout rang out from the VAR: it seems that the server had power management enabled... When the customer was "shutting down" the system, he simply put it to sleep. Leaving the system and devices live. Hot (un)plugging a non-hot pluggable device about five times in the process...

Needless to say, the data recovery folks were very pleased to make this gentleman's acquaintence...

by house

We offer web hosting. One of our clients has registered with the domain "hacks n cracks", or something along those lines. There were a series of phone calls back and forth between us and the user. He kept arguing that he saw the Apache "access denied" page when he attempted to visit the site that he had uploaded. We kept saying "upload your index.html, we can't see it. We can't do anything until that file is there." After much argument between us and the user, we checked out his folder on our server. He was uploading the file 'index.hotmail'. He thought that html was our little short-form for hotmail. Lol - Hacks n Cracks indeed. :)

by hal 9000

That I'm not the only one dealing with "Rocket Scientists" when it comes to customers.

But you have to have a good laugh when you finally work out what they where trying to do don't you?

Col

by house

I couldn't laugh at first because I was in shock. The customer was fairly aggressive with his previous phone calls, so we had to snicker a little bit when we explained the problem.

After the intial two minutes of dumb faces... we were bustin' a gut.

by zlitocook

At the bank that I work at we upgraded two servers and compleated the update at the workstations. All users were informed that the updates would keep thier settings and passwords. The upgrade was done and everything went as expected. But we started getting emails that the login for windows was not letting them into the other software. The upgrade was for software the passwords were the same as they used before. I tried to tell them that it was only for the software upgrade but I had to reset all passwords to let them type in new passwords.

by black panther

1. User rang up and said:-

I cannot find my icon ( called Proclient )to login on the desktop.

We said it must be there ( due to policies - they cannot delete it ).

He said I can see another one similiar but it does not say Proclient it says the same as my password.

What he had done was single click on the icon instead of double clicking then typed in his password!!!!

2. Customer rings up and says I cannot log in.

I said are you using a Dumb Terminal or a PC.

They said what's a PC. I said a Personal Computer.

They said no I use works Computer!!!

by black panther

1. User rang up and said:-

I cannot find my icon ( called Proclient )to login on the desktop.

We said it must be there ( due to policies - they cannot delete it ).

He said I can see another one similiar but it does not say Proclient it says the same as my password.

What he had done was single click on the icon instead of double clicking then typed in his password!!!!

2.

by kmbelk

This is a copy of an e-mail sent by a colleague. It certainly caused a riot in the office when I received it. I hope you enjoy.

"I have a friend who lives out in Sweden and she has a laptop - she went travelling and on her travels seems to have picked up an infestation of some kind or another in her laptop keyboard!!!!

She thinks its fleas but is not 100% sure, she just knows that "beasties" keep jumping out of her keyboard (this is completely true, its not a wind up).

She has tried leaving the laptop in a room and set off a bug bomb (those things that you set off to kill mozzies etc) but they are still there! She has tried hoovering them out but that didn't work either"

by rvokes

My best user story of the year?? well, here goes.

Whilst on holiday this summer, sat on the beach, reading some IT manual, my mind totally elsewhere. Then THE phone call, the one we all hate...
user: Help (no hello)I've got a problem...
me: hi, what's the problem???
user: I can't print...I get a printer unavalible error.
me: ok, have you checked the printer is turned on...
user: I have got my assistant to check it and she says that it's on.
me: has it got paper??
user: she (the assistant) filled the paper tray
me: hmmmmm... thinking....
user: does it make any difference that I'm not at my desk
me: no, It shouldn't do, as the wifi works all over the office... you are in the office right??
user: no, I'm in the airport...
me: (duh! why didn't I ask before) ok, why not send the document to your assistant to print it for you...?
user: I haven't thought of that... thanks
me: ok, bye
moral of this story, when on vacation, always have your wits about you...
Happy 2005 to all

by mr wolf

I would have thought the moral of the story should have been either:

1 - don't take the support phone on holidays, or
2 - don't accept support calls when on holidays

by paul.osborne

Easy one this; One of the company Directors using his deleted items folder to keep emails he wanted to keep; funnily enough they were cleared out when he ran auto archive.
Not only this, but they also advised 4 employees to do the same.....

Also the logistics manager that dragged me into his office because his PC wouldnt boot. The monitor was turned off!

by fresnotech

I have had that happen any number of times.

I either get emailed or called with someone saying "Did you do something to my computer? It won't turn on." That almost always prompts me to say something along the lines of "Yes. I turned off your monitor. Turn it back on."

by buck

I was asked by a menber of a sales team to burn a database to a cd. No probs there. They phone me later to complain that the database is now "read only".

by pete_g

Support call from user:
User: This software won't let me enter a date.
Me: What date are you trying to enter?
User: 31st September.
Me: Err...How many days has September got?
User: Ah...

by mmcdonal

What does this mean? What is a computer room lights out? Nobdy knew what happened? What is a new opportunity? Why were you afforded another one?

Speaking as another IT tech, I can say that part of the "problem with users" is the tech's penchant to assume that everyone knows exactly what they are talking about.

This is frustrating for anyone in any profession. As an ex-attorney, I know you have to take the time to educate your clients in order for them to appreciate what the heck it is you are doing for them. This raises morale and salaries both.

by yelt62

I automated the function of the Computer Room Operator to the point that they were no longer required to fill that function. Of course they were redeployed to more appropriate and value added functions.
I have been in IT for a number of years (16) and when it comes down to "end user" communication sometime too much is detrimental, other times, too little is the same. You just have to determine the end users tolerance to something they don't really care about or target the communication to those who may.

"New opportunity" ='s our companies way of saying "here you go, another project for you!"
LoL
Rb

by dave

Used to work for a company that ran online seminars for accountants...

One of the sales staff wanted to add the site to her favourites, so I told her to type:

www.nameofcompany.com and then press enter...

Got a phone call back saying it wasnt working, of course I started to worry, so over I went to see her...

she had typed as the web address:

www.nameofcompany.comandthenpressenter

I kid you not!

by youdnever

I received a call from a very anxious customer who said his computer had "swallowed a floppy" and it was the only copy of a very important project. On arrival at his office, I took a look at the floppy drive whilst he offered me whatever I wanted to retrieve this vital data. As there was nothing in the drive, I asked him for another disk and it operated just fine. "How can you do that?" he asked "I can't even get the other one out! -even with a knife". With a straight face I pointed to a floppy disk under his coffee cup and asked if it might be the missing item. ( It was). A very red faced and embarressed customer was then speechless !. He had spent 40 minutes or so trying to retrieve that disk .

by house

We had a customer bring in their PC to have us take a look at it. The customer complained that the cd-rom would only work half the time, and that he was losing some of his cds after he put them in the cd-rom dirve. The main issue that he had was with dead RamBus memory modules, so we had to open up the case to replace them anyways.

When we opened up the case, there were 20 to 30 cds inside?!?!? We narrowed the source down to the small slit between the frame of the case and the drive itself, where a couple of cds were still trapped. Needless to say, we did have to replace the memory, so it wasn't a complete farce. I still don't understand how someone could sometimes use their drive properly, and other times, shove the cd through the tower itself. :)

by fresnotech

I laughed when I read this one. I had heard of drives being off-centered a bit, and the disk beating itself against the plastic tray, thereby destroying the disk, but this is a completely new thing. Thanks for the laugh.

by thumper1

Back in the "BN" (Before Network) days, I received a panic phone call from a law firm. One of there secretaries "Lost" one of her 5 1/4" disks in the system. She tried to insert it in the slot ABOVE the floppy drive. $75.00 service call to retrieve it.

by fresnotech

I would have stopped and looked at him when he asked how you were able to get the other one in there. He did say he used a knife to try to get it out, didn't he? I know that sometimes there are small issues with floppy drives, but to use a knife is a little overboard isn't it?

We've gotten to the point that all the new computers we put into the office don't have floppy drives. We invest about $10 each for people who need to take files to other computers so that they can have USB thumb drives. There aren't many people, but it save the hassle of a floppy going bad on us.

by john.hart

The users here have to change their passwords every three months. I got a call from one of the nurses(I work at a healthcare agency) that after she changed her password she couldn't log in.

Figuring she forgot what she changed it to I reset her password. She still couldn't log in.

I made my way over to her desk. For user names we let them use their first and last names. Believe it or not she was misspelling her last name.

by fresnotech

At the company that I work for, our higher up admin people have static passwords. They never change. Because of that, they don't have 100% access to some of the more delicate features, like changing payroll amounts. That is left to our payroll person. Anyway, because of these people and their lack of IT knowledge, we had to give them passwords that are their last name, and some people get that wrong, and it almost always ends up with a call to me wondering what I did to their account.

by sc00by_uk

We've just migrated from NT4 terminal services to 2003 terminal services and it's all gone pretty well (apart from the damn printers, but that's another story)

To save hassle I disabled the RDP service on the old server, whilst leaving the server switched on in case I needed to get some data off it that had been missed in the transfer.

Everything was good, until I needed to RDP into the old server a couple of weeks after the switch, so I enabled RDP on the old server and we logged on and did what was needed and went home.

The next day I had no fewer than 4 support calls in the morning wondering where the last 2 weeks of email had gone... ;) That'll teach me not to disable things when I'm done with them I guess...

by rycherulz

I'm a helpdesk/admin support agent, and part of the job is of course, password resets, both for the network and for the AS/400 user accounts. I received this call yesterday from a user, who, shall we say, isn't the brightest bulb in the box.

He told me he needed to reset his password, because he had been away for a while, and didn't remember what it was. No problem. It then took me about 5 minutes of coaxing for him to spell his last name correctly to me.

"S...A...U...D..... no, that ain't it. S...A..N... nope, that's not it either..." and on for several minutes.

He verified his employee id, so I assume it was the actual guy, and not someone else trying to use his account.

by steve

whilst having problems with my ADSL line the tech support guy at the other end asked how close my christmas tree lights were?
about 6 inches apart on the wire was my response.
apparently they had had a few customers experiencing slow speeds and been unable to connect and switching off the christmas tree lights fixed the problem.
well you learn something new every day.

by bhlang

This is a real problem. Some strings of lights do cause interference with ADSL modems, but if they're plugged into different electrical circuits in the home, you'll be fine.

by pr0teus

Steve,
Did this actually work??
And was it caused by the lights being plugged into the same socket or any socket in the building?

I've had some crazy problems of late with a client's DSL access and I'm just about grabbing at straws!!!

by house

I do tech support for an ISP right now, so I am interested in knowing whether or not the lights were causing problems with dsl sync.

by pdm45

It's true, here's a message from BT:

Important news I001 8th December 2004 - dsl affected by festive lights.

Important announcement

'Dodgy Christmas lights are being blamed for knocking over broadband connections, with imported flashing lights that don't meet UK electrical standards fingered as the worst offenders.'

"It has come to BT's attention that an extremely small percentage of seasonal lighting, which can be used both internally and externally may cause interference with the broadband service.

"When the lighting control unit is set to any mode other than a steady state it may generate high levels of radio frequency noise and may cause the broadband service to lose synchronisation.

"Investigations have revealed that the broadband service may be impacted where the lights do not meet the standards necessary for customer equipment marking."

So far, only a few dozen instances of flashing Christmas lights felling broadband have been reported. Incidentally, similar advice had to be issued last year. '

Can you please ensure that this is borne in mind when you are diagnosing ... faults for your end-users.

by jamesrl

I know as an ex Norteller that we sold equipment to BT to do DSL over power lines - are we sure this isn't the issue - that I can understand.

I had problems with computers in the same circuit as air conditioners.

James

by fresnotech

I had heard of this happening, but no one has ever been able to explain why that might be. If anyone knows, could you try to explain?

by jlanus

This remainds me of a (long before 2004) server, a $25K Compaq powerful 386 that worked fime but, after a few minutes it became painfully slow.
IT guys went to the server but always found nothing.
In short, it was that "pipe dream" screensaver that ate all CPU resources when the server was operator free.
- - - - - - - - - - - - - - - - - - - - - - - - -
This is not a user story but an IT guy story. I dislike the "users are all dumbs" mood because after so many years serving then I started to understand how they see us IT people. Specially programmers like for example me.
Actually most of the times, when a user doesn't get it, I realize that it was not as clear as we IT nerds see it.
The PC is intended for general use. Everybody, including that aunt of your's ...
Every guy who can't make it, and there are many, is a flashing signal of the failure to hit the intended target. As time goes by more and more children who were born near a PC are getting active and more old men are going retired, so using a PC is turning like using an elevator, something you give for granted.
This only hides the fact that using PCs is not easy. And by "using PCs" I mean operating software (the hardware is innocent).
I keep this in mind whan I design my programs. I'm sort of a "usability" advocate, seen as having betrayed the IT geeks and not being an user I'm sort of a lonely outsider from everywhere!

by jlanus

I don't mean at all that this thread is about bashing users.
Many postings show how you care for them, with affection.
It's that after thinking about what I wrote I perceived that it might be offensive. Sorry.

by rdufrene

I had a very annoying email user complain that when she replied to another user the person's last name would change to something else. What I discovered was the user had automatic spelling correction turned on and accidently changed the name. Thus, everytime she hit the send button the name would automatically change. LOL

by hepabolu

This story didn't happen this year, but it's too much fun not to tell it.
Every year at the beginning of the academic year, first year student had to take computer courses. One of the programs taught was WordPerfect.

One day a student came up to me and wanted to check if she had understood it correctly:
so for a soft return I gently press the Enter key and for a hard return I just hit it hard?

Can't remember what the answer was. :-)

by fgarvin

I have 2 stories, and neither has to do with the typical user. I work in a major Military Installation and work in Domain Admin/Desktop Support. Now for the stories:

1. An Upper Level Network Unix Administrator was concerned about the security of his system. As a Unix Administrator, he was granted Local Administrator rights on his computer. One day, we received a call saying his system Blue Screened everytime he tried to log on. Thiking that this may be a Corupt Profile, I acccessed his system remotely accross the network and started poking around. I checked security settings on the Winnt folder and discovered that all permissions had been removed except that of the user. Further checking revealed that all permissions on all folders had been replaced the same way. He was so concerned that someone was going to break into his system that he restricted everyone, and everything (Including the system) from accessing itself.

2. We have been attempting to upgrade our network to Gigabit standards. Our LAN Maintenance Shop replaced several switches in one wing of the building with new Cisco Gig Switches. Suddenly, many systems with Gigabit NICs began displaying problems with connectivity. However, we were able to get the problem resolved by setting the NIC and the Switch to Full duplex 100 mbs. Of course, we did not leave it there, we wan't to get the network speed up to Gig Standards. The Solution offered by our LAN Shop was to replace the NIC driver on over 3000 systems. This was not something we looked forward to doing, nor did it make any sense. Some of our team began looking into the matter on their own and discovered that the building was wired using 25 pair twisted cable (CAT 3) wire. This is Telephone quality cabling. Now that we had the evidence in hand, we went to our boss and told him. He went up to the LAN shop and told them, and they flatly denied the existence of such cableing. So, the boss came back down to us and said as much. So we showed him again, took the numbers off the wires, looked up the codes on the internet which verified that the wire was in fact Telephone wire and was not to be used for anything other than voice, Token-ring or 10-base-T. In addition, we looked up the IEEE standard for Gigabit networks and printed that up as well. All this eveidence went up to the LAN Shop. Their response is to have Broadcom, Intel and 3 com write new drivers.

Sometimes the enemy is within.

by fresnotech

The nerve of the lan shop. With the evidence in hand, they still denied they were at fault? I had heard of that possibility, but never believed it. Some people just don't want to take the blame for anything, and even when pointed to the evidence, will still try to use the tactic of plausible deniability. Nice.

by robbi_ia

I work for a non-profit that supports area preschools. As part of the curriculum, back in '96, the schools bought computers for in the classrooms. They were loaded with children's software. Now, it's 2004, and some of the computers are failing. I went on a service call in one of the classrooms for a computer that wouldn't boot. When I arrived, it was obvious that the hard drive had failed. I pulled a swap computer out of my truck and went in to swap it out. The preschool's center supervisor asked me why I was replacing the computer, and I told her the hard drive failed. When she asked why it failed, I replied "old age". Her response? "But they were new when we got them!"

by husp1

I deal with mostly home users and some of the funniest things are normal occurences for me. How about the home user that decides to upgrade there OS from 95 to xp on a pentium 2 with a 2gig harddrive! or the time I had a home network user calling me to say that when she deployed sp2 her network had issues, I inocently said that sp2 had a few bugs in it so I,ll come and look at it for her. upon arrival she was in a state of panic. apperently she tried to get rid of the "bugs" by spraying Raid ant and roach killer into the fan intakes. and of corse my favorite is my little woman highlighting every icon on the desktop then opening them. :mrgreen:

by simply dope

Support call I received:
User: My search isn't pulling back any results.
Me: (tests search) Ok, it seems to work with me. What's your date range?
User: From 10/31/03 to 10/1/03.
Me: (silence)
Me: Um, you've got the dates backwards.
USer: Why does that make a difference?

by kaceyr

This happens so often with my users that we now write code to swap the dates when the user specifies the date range backwards.

We also recompute the last day of the month when they screw that up (almost as often as the reverse order date range).

Ya gotta love them users!

by timbo_in_nc

USER: I can't receive any email
ME: Do you get any kind of an error
USER: No, I just don't get any email
so I got to her desk to see what the problem was, I sit down and hit the send/receive button and everything comes in fine. She said you are a genious, how did you do that? I went into her properties and selected the email to send and receive automatically. To make myself look a little better I explained that outlook express had been corupted and I had to reprogram it to send and receive. She was soo impressed, she said I dont know what we would do without you IT people!

by fresnotech

I do that sometimes to, tell the user that it was something a little more, but normally I say it with just enough sarcasm that they would hopefully figure out that it wasn't that hard to fix.
I can't remember how many times I will visit someone, and tell them what I did, with the sarcasm, and watch as the person's face figures out that I was being just a tad bit insincere. They are used to the sarcasm now though.

by arahigihs

I'm an IT Executive at a company where 90% of our users are computer illiterate. Needless to say, my days are filled with great stories. However, the one that stands out most in my mind from 2004 is not the cause of one of the "Technologically Challenged". We have implemented the use of several Symbol handhelds to move and keep track of our inventory. The user comes to me with a handheld and asks me to look at something. He presses the button to activate the barcode scanner and asks if there is supposed to be a gap in the laser. Sure enough, there is a small break in the laser. Trying not to laugh to hard, he is a good friend of mine after all, I reach over and relocate the elastic tether attached to the stylus. Of course, with this obstruction out of the way, the scanner worked perfectly.

by lee d

One of our sales reps had an ageing Compaq Deskpro 2000 as his workstation at home for collecting emails and such, and one day he called up the helpdesk to say it had a fault. So, we asked him to bring the box with him the next time he was due in the office.

When he came in to us, he had a big grin on his face, and said "You won't believe what I've done this morning!" He then proceeded to tell us that when he was loading his car (which is a large(ish) 4x4 off-road thing) he left the base unit by the boot while he collected the rest of his things. He put his things in the car, and then reversed out of his driveway. As he reversed, he felt the car go over something large and solid. He got out, and sure enough he'd driven over the base unit!

He handed the unit to us, which initially looked unscathed apart from a huge tyre mark running diagonally across the top. However, when we put it on the desk we discovered it was, well, bent! It rocked quite noticeably when placed on the desk - I guess the metal case cover (which is pretty tricky to remove on the old DP2000's anyway) had bent under the car's weight, and because of it's rigidity had pulled the frame out of shape as well.

Even more remarkable, though, was when we powered it up: it still worked!!

The rep found all this highly amusing - he laughed the whole time he was telling us about this - but his boss wasn't so amused. He made him keep the twisted computer instead of surprising him with the laptop we were replacing it with!

by fresnotech

Guess it's a good thing he didn't get the laptop. Doubt it would have held up under the same pressure.

by lcave

Just this week I got a call from a very harried user. She had to have a new keyboard right away! It seems she just couldn't type certain naming conventions in the correct format because she only had one type of slash on her keyboard. She said that she looked and looked and could only find one slash (the forward slash). I went to her desk and calmly pointed out both slashes.

by xtrainer

User: Hi! I need some help. I'm trying to burn Microsoft Word on a CD so I can install it at home, but it doesn't work. When I copy it to my drive at home I can't get it to run. What do I need to do?
Me: Let me just understand this. You're trying to take a copy of Word so you can install it at home.
User: Yes...
Me: And you want my help...
User: Yes...
Me: Did you know that software is copyrighted?
User: Well, yes, but...
Me: So you're asking me to help you steal copyrighted software...
User:

by fresnotech

I have had this happen a couple of times to me. A user will come and ask me for software to use at home. Apparently, the boss had said that it was ok. I calmly tell them that I could get them the software, but I would have to order it, and it would come out of their already strapped-for-cash budget. That cools that idea for a little while. I then just have to talk to the boss and explain that if he wants the people to have Word at home, then he might have to break out his checkbook. He drops the idea for a little while, but it doesn't last long. Someone else will call me and ask for the same thing, and have to do it all over again.

by arahigihs

Some of our users recently decided to trade desks. Instead of clearing everything off of the desks then relocating them (they are modular desk/cubicles and the desk heights are adjustable) they moved the desks first and were surprised when one of the computers (monitor, tower, keyboard, etc.) scoots right off the desktop and, obeying the law of gravity, falls the 4 feet to the floor.
The plastic face plate shattered, but the computer still works.

by rcsoar4fun

I support about 400 remote users, some 100 or so miles away. These tend to be critical systems that must be back up within 4 hours of a failure. I get a call on Friday afternoon that one user had moved their PC to a new desk and it would no longer power on. The location was about 75 miles away and I had no desire to go on site. I had the user double check the power cables to which I received a response of "I already checked that" with a tone of "I am NOT stupid". So I asked the user what color the power cables were. He replied both were black, but one was thicker than the other. I had him swap the power cables between the monitor and CPU. I said the cables look exactly the same but are not interchangeable. He said that was pretty stupid, to which I agreed. It then booted without issue. Of course the power cables were fine, but he had not inserted it all the way. The hardest part about the call was trying to explain the fix to the other techs in the office that heard the call.

Kristopher

by fresnotech

That is a very original way to solve that problem. It kept the user from feeling stupid, and it got them powered on. I'm going to have to remember that one the next time someone in one of our out-of-state offices has a problem.

by lee d

So far I've read many examples of dumb users, but nothing about those who are just plain gullible. So here's my gullible user story - it's a bit old but I think it's worth telling again.

One day I got a call on the helpdesk for a user in our labs who was having trouble printing. I went to see her and discovered she had tried many times to print, but to no avail. She told me that she tried everything - replacing the cartridge, reseating the paper in the tray, turning it off and on, and even shouting at it! As she mentioned the verbal abuse (and as I was in the mood to be silly), I said "Aaah, now that's what you're doing wrong! These printers are very sensitive, and they prefer it if you talk to them nicely."

She looked at me skeptically, so I proceeded to stroke the top of the printer and gently ask it to start working for me. I then re-sent the print to it and - hey presto - it printed out! The user's face was a mixture of awe and disbelief! After running off several more prints, I told her it would be alright now and to let me know if it stopped again.

I never heard from her about the printer after that, but I walked past her office a few months later and saw her whispering gently to her printer whilst stroking it! She even passed on this bit of "technical expertise" to other people in the building!!

by rcsoar4fun

I gave a computer to my aunt, who is more than somewhat technically challenged. I get a message from her one night that the CD-ROM ate her mouse and she wants to know where she can download another one, or maybe by one at Walmart. At this point I am concerned, if anyone can make a CD eat a mouse it is her. I call her back to discover that when inserted a CD from a cereal box into the drive. When it autoran it locked up the computer, causing the mouse pointer to disappear. A reboot and all was fine.

Kristopher

by answerman

I run a little residential and commercial computer service and solutions company....
User: My speakers just stopped working
Me: When's the last time they worked?
User: Yesterday before I vacuumed.
Me: Is the light on the speaker on?
User: Yes
Me: I'll be right over.

Found out the plug came out of the sound card when she vacuumed, and she put it back in the mic input.

Service Call: $50.00
Time Spent: 30 seconds
Distance: 1 mile
Users that are too embarrassed to admit they might have done something wrong.... PRICELESS!

by rmccready

I support a user who is constantly at odds with her computer. She does not like computers and does not trust or believe them. One day she calls me and says a report she ran was incorrectly reporting our revenue projections. She had run the report several days prior and at that time it was considerably higher than it was today. I told her that it could be do to jobs being cancelled and that the report was correct. She actually had me hold on the line while I heard her adding up all of the computers numbers and she told me she was just trying to make sure the computer was adding properly!

by mhasf

When teaching a new user how to use her computer terminal, it was getting close to 10:00AM. Both of us being smokers and coffee drinkers, we were getting to that point of withdrawal onset. At this point in her training session, we were reviewing keystroke shortcuts.

Anyway, we came upon a suitable breaking point, and I told her "...ok, it's time to get off the computer." She looked at me with a puzzled look and then looked back at the screen. She exclaimed that she was not [perched] on the computer. It was all I could do to keep from losing it right there and then. So I went on to help her along and said, "No, let's break now!" She joyfully exclaimed "I know how to do that!", and very confidently hit the Break key.

Happy Holidays!!!

by fresnotech

I was talking to our receptionist, whom I happen to think very highly of no matter how this makes her sound, and she proceded to tell me how she was afraid of hitting the delete key for the longest time. She was afraid that it would delete the whole drive, and there wouldn't be anything she could do to get it all back. but, she said proudly, I am not anymore. I will even hit Ctrl+alt+delete, which she only has to do when we tell her to do it because something is hosing up her 98 box. Needless to say, it was all I could do not to laugh when she said that to me, but I think I did have a small little smirk on my face.

by luschen1611

This isn't from 2004, but it is the funniest phone call I've ever had.

This happened back when California was having those black outs because of the lack of electricity. This lady calls up and says that her computer would not turn on at all (keep reading....not due to a black out). She would press the power button but nothing would happen. I verified that she was pressing power on the system and not the monitor....checked good. Monitor had a green power light. I asked her to look for the black power cord behind the tower to ensure it was plugged in.......nope, it was unplugged. I asked her if she unplugged the power cord. She said she did! While having a dumbfounded look on my face I calmly asked why she went and unplugged it. Her answer? "I don't use the CD-Rom at all. And I'm down in California where we are having power outages. So I thought I would unplug the CD-Rom to conserve energy." I had to put her on hold after that so she wouldn't hear me laugh. After telling a couple other phone techs who also laughed, and bringing my composer back under control I explained that she needs the power cord for the computer to work....it isn't just for the CD-Rom. She understood and all was well.

by answerman

One phrase, one meaning, 80% of the calls to helpdesk are filed under that acronym. And what does it stand for my fellow techs? Simple.....

P.E.B.K.A.C. =
Probable Error Between Keyboard And Chair

by fresnotech

I never had the acronym, but I have definitely used the terminology before. I have even told a user that, but only a user that would know I wasn't being purposely mean, just making a joke.

"It seems that the problem was somewhere between the chair and the keyboard."

Watch them look between the keyboard and the chair to figure out what I mean, especially if they aren't sitting in the chair anymore. Normally takes a couple of seconds to get it right.

by it_lobo

I like to tell them the problem was a "loose nut behind the keyboard". You would not believe how many turn their keyboards over to check the screws!!!

by toolhorder

I do tech support part time for a small non-profit while I?m in grad school. Maybe 75 systems spread out over 50 miles. Many of these systems are located in offices at the users homes. I had one woman bring her system in for a complete rebuild as her kids had used it for file sharing and had infected it with everything possible. I get it re-done in a couple of days and even drive it back to her home and drop it off. She said she would have no trouble hooking it back up. I get a phone call and a stupefied young girl is saying that the computer won?t turn on. ?The wireless isn?t working? she keeps saying. I?m thinking?this thing doesn?t have a wireless card. The woman had brought along the power cord with the box and I didn?t know it and I hadn?t returned it with the computer. Wireless power. Go figure.

by dbsteele

I was helping my accounting manager to do some important reports for head office. We worked late into the night, and were both pretty crabby. This was in the days of 5 1/4 in diskettes, and we had no network. I was working on one PC, she had the master system on hers. I finally finished my part of the work, rushed into her office with my diskette. I inserted it into her computer immediately started laughing hysterically. She thought I had finally cracked.
What I had done, however, was push the diskette into the gap between the two diskette drives! It was the only copy, so I had to find a screwdriver (no easy task at that time of night) and dismantle her computer before we could finish.

by rk bill

I run the IT/Records Dept. for a State Agency.

1. User calls - I lost the thing that does my stuff.
I get to her desk and find that she had closed the MS Office shortcut bar and when prompted "....Do you want the shortcut bar to start automatically when you start windows" apparently answered 'no'.

2. User calls - I can't print.
I get to her desk and find that she has closed the MS Word standard toolbar.

by fresnotech

I had that toolbar thing happen to me, but the problem was a little more than just closing it. You are aware of how you can drag the toolbar so it isn't anchored anymore? The General manager had somehow figured out how to drag it, and left it off the screen. I went into word and it showed that the toolbar was on, but I couldn't find it. The only way I could get it was to change my resolution, and drag it back down. I don't know how I figured out how to try that, but it got the toolbar back, and the GM doesn't feel like he's wasting money to pay me now.

by fagell

I work for a government agency and we recently implemented video conferencing on the WAN. One of the users workstation with the camera and microphone installed failed in one of our remote offices. So our staff support tekkie had her move it to another WS and then the tekkie reinstalled the software on that WS. She then told her to test it by making a call to another staff member with a camera. The user then called back a few minutes later and explained that she could hear him but he was having trouble hearing her, but he could see her okay. So the tekkie explained that they might have to play around with the volume. If she couldn't get it to work to call her back. Well the tekkie never heard from her, so she assumed the problem was resolved. Well, a few days later, the tekkie was on site at the remote site, where the user was calling to test the camera. The guy who was receiving the call, explained to the tekkie, that he had solved the problem. When she made her video conference call, he could see her but still could not hear her. So he said to her, maybe you just need to yell into the microphone. So she proceeded to pick up the camera and yell into the top of the camera, which in turn gave him a close up video of her "chest". Needless to say, he was at first speechless, but handled the situation well. He picked up his microphone and spoke into it in front of his camera and said this is the microphone. She looked over to the "dead" computer next to her and said, oh that is a microphone??? She never moved the microphone from the other ws. LOL

by pwrightson

We have a non-profit customer that also has a small retail store. The store manager was trying to do an inventory, but the POS/inventory system was having an issue. They were using a hand-held to scan the inventory and load it into the POS PC but the files could not be sent to the backend (unix) system.
Our customer had an open ticket for two weeks with the vendor of the system, who insisted that everything should be working fine and that it was obviously something the customer had done (nice support!) since "well, the server can see the PC".
So the customer involves us as we handle their general IT needs. I had called the vendor a couple of times and was trying to understand how the system was supposed to operate - this was our first involvement (and last, hopefully) with this software. I had set up a conference call between myself, the store manager, another one of our consultants and the vendor.

Me: OK, so let me get this straight. You dump the files from the handheld into the checkout PC, and that is working fine.
Everyone else: Yes.
Me: How do the files get onto the server? What process transfers them.
Vendor: Well, the user moves the files into a folder on the server using Windows Explorer.
Me: So, you are using samba.
Vendor: Yes, and it is working fine. When we log into the server, we can see the PC.
Me: Ah, but that would be using the samba client tools. To push the files from the PC you need the samba server to be running, right?
Vendor:
30 seconds elapse.
Me: Hello? Everyone still there?
Vendor: Yes, we are just discussing it.
1 minute later.
Vendor: OK, everything should be working now.
Store Manager: OK I see it. I am copying the files. Its working.
Me: So you did not have the samba server running?
Vendor: OK. I think the issue is resolved. We are going to close this case now. Thank you.

by seanh

One of our vendors(whom we have come to have a great working relationship with) worked on a big NT4 rollout for us a number of years ago. The engineer assigned to work with us is a big fan of batch files! So, after the rollout and a year of students gumming up the servers we asked him to write a batch file to clean out the student directories on all the servers. He did, and successfully tested it on our test server (apparently). Three technicians had run the script on their servers before we could get word out that the cleanserver.bat file with the "deltree" command in it was deleting all files in the root directory. The funny part was that at Christmas his colleagues at his work gave him a Christmas Tree with little "DEL" ornaments on it--a deltree.

by paulb7

I upgraded one of my customer's whole network system about 2.5 weeks ago. New HP Proliant ML350 G4 and 24 port switch running Small Business Server 2003. Took the whole weekend. They also upgraded to ADSL supplied by their ISP.

Got a phone call from a very irate director. Your new )#Q*#Q%(*# system does not work. No internet, can't log on !! NOTHING !!! WHAT THE HELL DID YOU SELL US AND INSTALL HERE !!!??

Rush over to check it out. Server says "Cable Unplugged" Check the network cable, everything is fine. Go check the switch, lights are off. Follow the electrical cord to the wall plug, it's switched off. Switch it back on, everything works OK.

One of the directors was moving old computer equipment into the store room where the switch is located. He packed everything neatly together and pushed an old 17" monitor against the switch of the wall plug switching off the electricity & the 24 port switch. Needless to say, many red faces everywhere. Still, no apologies to me for cursing and blaming me for their stupidity.

Go figure. Looking for a different profession.

by btang

I used to pick up help desk calls when I was working for a large coperation. One day a user called and told me that she couldn't turn on her computer.
I asked: Is the power cord plugged into the computer?
She answered: Yes.
I asked: Did you turn on your computer?
She answered: Of course I did!
I asked: What did you see on the screen?
She answered: A black screen.
Then I asked her to press the power button but she told me: I tried many times already. My computer is not responding!
I asked her: Which button did you press?
She said: The button under the screen.
LOL - She turned on the monitor instead of the PC tower!

by gwiggs

Back in the early '90s I gave my mother my old 386sx computer. Her first graphic user interface (Windows 3.1). I had just completed my CSCI degree and wanted an excuse to upgrade.

She hauls the computer across country and set it up. Then she called me, to complain that the mouse wasn't working. Windows 3.1 wasn't exactly stable, but when I walked her through some trouble shooting, everything seemed OK.

Every time I asked her to try the mouse, she would say the the cursor ''jiggled'' a little, but the pointer never moved. While I was trying to figure out her problem, I would pick up my mouse and tap it on the desktop. I noticed that this would cause a slight jiggling action.

When I asked her to describe EXACTLY what she she was doing, she told me that she was picking up the mouse and setting it down on the mouse pad where she wanted the cursor to move to. She had no thought of sliding it, just figured that it was somehow connected to the mouse pad and moved accordingly.

by davejesc

I had a client who had other building users complain that their wireless signal kept going away. It turns out this only occurred when the client was logged onto the network. If they were off or away, everything worked fine.

Turns out the client had relocated the router onto their desk right next to their mammoth PC monitor.

It only took a few seconds to realize that the monitor RF was blowing away the WIFI signal - or that the CRT gun magnets were distorting it. When the user was not logged on or at their desk using the computer (monitor on), everything worked fine!

Relocated the WAP away from this nuclear PC monitor and life was great again.

Well, it was funny at the time.

by warwizard

One time I was assisting a Netware admin install his NW 3.12 in his new PE2300 server. (This was a few years ago!) He had a NW 2.2 server on an old DX40 system. Up to this point he had been knowledgeable and able to do all the tasks, so I was surprised when we had the following discussion:

Me: "Ok put your Netware CD in the drive."
Customer: "How do I do that?"
Me: "press the button on the CDROM drive."
Customer: "Ok it opened and closed again!"
Me: "Press and release the button."
Customer: "Ok it stayed open that time. Which side goes up on the CD?"
Me: "The label goes up."
Customer: "Ok, ... it's copying files now."

I checked the configuration on his old server it did not have a CDROM drive, this was his first time he had ever seen a CDROM drive. I was impressed that he asked which side went up!

by csclark

I've noticed that most users don't fully understand the concept of power, at least in reference to computers. At least 90% of the calls I get about computers not coming on properly are because they have no power - either the monitor or cpu is unplugged or the power strip is turned off. These are my two best ones:

I worked in the administration complex of a local school district, in IT. We had a bad thunderstorm and lightning hit a transformer down the block, which caused the transformer in our parking lot to go, too. Of course, all our power went down. Central office used terminals connected to an AS/400 several miles away. When their terminals went off too, they called us asking why. We told them all power was out, to wait for it to come back. Later, the power came up half-way as they replaced one of the transformers. The lights were flickering on and off. Two minutes later, we start getting calls that the terminal screens are shrinking and expanding, making it hard to work. I asked them what their lights were doing? They said 'going on and off'. So I asked them what makes them think their terminals will work if the lights won't? Their answer: the main computer they are connected to has power!

The second is not technically a power issue, but that's what they called in. We gave one of our users a laptop to replace her old desktop pc. The laptop came with a docking station, monitor, keyboard, and mouse. I showed her how to use the laptop in the dock & out of it. The next morning I get a call that the computer will not power on, but the monitor is on. I go to her desk and the green light is on on the monitor alright, but there is no laptop in the dock. I asked her where the laptop was and she said at home, she didn't think she needed it here. It didn't occur to her that the monitor, etc., wouldn't work without the COMPUTER!

by moira

I must admit I read the original post not understanding what you were talking about. I assumed this was just my lack of knowledge :) good to know someone else didn't "get it" either.

It does illustrate the point that communication is a two way thing and that some end users inability to understand something is, while amusing, partly the fault of the IT dept in explaining it clearly.

by house

I was a little bit embarassed at first, but I'm glad that I'm not the only one.

The original post has been edited and removed?!?!? Now we'll never be able to decipher it. :)

by moira

Why not just explain it properly in the first place? With so many posts, nobody wants to go look on Google to make sense of them.

by jwmccoy

In a large customer service department - we had terminals on each desk. I received a call that one of them had smoke coming out of it. I went out and sure enough... a pillar of smoke was coming out of the back.

I asked what had happened. The lady responded, I was just watering plants. Looking at the terminal again, there was a plant on top of it. Apparently - water had entered the terminal and shorted it out. I explained that they shouldn't put anything at all on their terminals. Much less a plant.

Upon closer inspection... I noticed that they had watered a plastic plant!!!

by house

I think that it was your last point that really got me. You just have screamed "Alright... everyone out of the (gene) pool!"

Where do these people come from?

by it_lobo

I was having a boring day, until I read that.

That was the funniest thing I have read in a long time.

by singerguy

I went to a small remote office to take care of some routine maintenance items. While there I was told that several users were having trouble with their phones and hooking up their laptops to the network. These users are in a block of desks that free stand in the center of a large room. They are home health nurses who work in the field and this is just a place for them to update their email and check voicemail. Their phones have to be plugged in to AC power if they want anything more than just a dial tone. There is a small switch mounted between the desks that lets them share the one network drop in the room.

After a few minutes of troubleshooting equipment I found out that they had redone their power strips. Now the wall power went to a new switchable strip that all their Christmas tree lights were plugged into, and then their existing strip was plugged into one of those slots.

Sure enough, someone had switched off the tree lights the night before by turning off the new power strip, thus killing power for all those desks. I lit the tree and their phones with one flick of the finger, followed by a teaching moment. LOL

Another power strip story from last week. A user told me her printer had died and that she had "tried everything" to get it to work. I asked her in a teasing voice (she is a good friend) if the printer was plugged in. She replied with slight irritation that of course it was, and everything else plugged into the strip was working, so she knew it wasn't that.

The first thing I noticed was that this dual row strip had one side unswitched (where all her other things were plugged in) and the other side switched (where just the printer was plugged in). Yep! Someone had stepped on the very exposed power switch, turning off the power to just her printer.

I think she was most mad that it took me all of 15 seconds to identify and solve a problem she had been fussing over for hours.

by rockymtnman

We had a call from a new customer one day complaining that they couldn't get their Internet to work. After talking to the ISP for a while it was decided that they needed to have a professional look at it. They called and we had them bring in the computer. It worked just fine for us but when the customer came back the tech started asking more detailed questions. We found out that they had just gotten a broadband connection put in the house and it came with a cable to plug into a connection on the computer. It looked like a telephone connection so they tried to plug it in. It wouldn't fit! After some thinking, they thought they solved the problem. They cut off the 'too large of an end' and stuck the wire into the hole (a phone jack) on the back of the computer. (There was no ethernet jack.) They didn't think they needed a connector on it because it now fit into the hole. This is the point they made their first support call.