Question Locked

Gateway and Powersupply issue.

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hello,
I am having a problem with my Gateway 920.
When I plug up the power supply.
1. My powersupply fan does not work.
2. My powersupply TURBO fan button does nothing.
3. My computer shows it is on.
4. My motherboard light is also on.
5. My monitor gets no response
6. I cant do anything but unplug it.

This problem is really freaking me out!
Do you think that the powersupply is burnt out? is their anyway to tell??

1 more important detail
When i unplug my power cable from the powersupply. My computer takes 4 seconds to discharge (power light goes out)

Is there anyway to tell if im overvolting it?
I have not changed any settings.

I really just wanted to know if
1. What is going on with my computer.
2. How can i fix it.

Any answer at all! would be very appreciated. I am very nervous...

I hope this also solves the question for the people reading this. :)

Thanks for reading!

3 replies

by computercookie

taken a surge, the reason why thy MB LED and other LED's work is because the will operate with a varied voltage.

MB's and RAM require more precise voltages for them to work correctly.

If you continue to try and boot your system you will wreck your MB, this if it wasn't already wrecked by the original fault.

suggest you contact a repair person or be prepared to puchase other parts to fully diagnose the problem.

Jeff

by Former member

ComputerCookie on this, you will have to get another power supply to check this out. If you do and it still would not boot then you will have to check the graphic card or memory to make sure they are all properly seated.

Please post back if you have more problems or questions.

This discussion is closed to new replies.