gateway tower help needed
my pc was working fine and one night it put itself in
standby/hibernate
mode, and now i can not bring it out. no componentsw work
ie.. hard
disk,keyboard etc. i have shut down and unplugged, any
suggestions
please
Desktop
my pc was working fine and one night it put itself in
standby/hibernate
mode, and now i can not bring it out. no componentsw work
ie.. hard
disk,keyboard etc. i have shut down and unplugged, any
suggestions
please
by rumrunner02 Accepted solution
by hal 9000 Accepted solution
What's happening now?
What if any LED's light up and do any fans work?
By the sounds of things this is not a Software problem but that Hardware failed when you thought that it went into Hibernation and you've been messing around with a hardware problem by looking at the Software since.
Col
by rumrunner02 Accepted solution
well no fans work actually nothing works at all. there is a
green light on i asume the mother board which tells me there
is power there, the power button in the front is a constant
orange as opposed to green for being on. i have not messed
withb any hard or software, the pc was not in any power save
mode to my knowledge as it was aqlways on. as i stated from
the beggining this happened overnight about a week ago as i
was going to sign on and i noticed my problem.
by w2ktechman Accepted solution
or the MB is shorting, but the PS fan should start and stop quickly. Wa the unit moved recently?
Open it up and make sure that the PS has a good load on it (plugged into the MB), and unplug all other power plugs. Will it sart to power up? Do the fans spin?
If so, start plugging things in one at a time until it fails.
If not, then the PS or MB probably needs replacing.
by hal 9000 Accepted solution
My first option would be the Power Supply as well. Particularly if its one of the unbranded ones that isn't well known so I would suggest swapping it out and try again with a bit of luck the Faulty PS will not have hurt the M'Board.
Col
by rumrunner02 Accepted solution
to all who helped in this matter, turns out that it WAS the
poer supply. ordered on and installed and all seems to be
fine, thanks again, matt
This discussion is closed to new replies.
Sort by Trending