Discussion Locked

Hard Drive FAT & MBR rewritten

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Windows 98 Second Edition system, while installing the Symetec Norton Systemworks 2002 which includes the program Go Back 3.0, the program Go Back rewrote my FAT and MBR for my hard drive and now I am unable to access anything off of the hard drive.
I have contacted Symetec / Norton and they do not even respond to my questions at all.
Is there any way to recover the data from the hard drive or to reinstall the MBR and FAT?

6 replies

by maddiuex

HI,
try fdisk /mbr off a clean windows 98 boot disk.
Can you boot up to the norton cd and run the hdd system diag? in dos?
Hope this helps

by ddelauder

No, I can not boot up to norton cd as it only runs when Windows is up and running.
I can only boot up using the A drive boot disk as the system will not recognize either of my hard drives on this system ever since I installed Go Back on to my system.
And I thought Norton was supposed to solve problems on my system, not create problems.

by ddelauder

A;ready tried everything that was on the Norton Website to try and solve this problem.

by sfhsgrad00

What you may want to do is try to reinstall Win98. If your system still does not boot, you may have to wipe your hard drive. usually if your FAT goes, your partition will go with it. If this occurs, the only remedy is to repartition and reformat your hard drive, which will remove EVERYTHING from your disk. after which, you can reinstall your operating system.

This discussion is closed to new replies.