13 replies
by d_v ant
by mihkel183
Poster rated this answer.
by stroke311
by mihkel183
Poster rated this answer.
by otl
by wcp
I believe stroke311 was right.
Most of the HD manufacturer (including Seagate) uses disk capacity based on
1 GB=1000 MB=1000000 KB=1000000000 B.
Partition Magic and others (including Windows) may use a convention of
1 GB=1024 MB=1024*1024 KB=1024*1024*1024 Bytes.
So, 120GB = 120000000000 Bytes or 120000000000 / 1024 / 1024 / 1024 = 111.8 GB, Which is what you got.
Reference: http://tinyurl.com/2z322
by shuja52
by mihkel183
Poster rated this answer.
by tech_x
I've installed many hard drives...I work in IT...It is normal to see less than 120GB on a drive because 60, 80, 100GB drives are often less than an actual size 120GB given to the buyer. here's a link from wired news that explains-
http://www.wired.com/news/business/0%2C1367%2C60505%2C00.html
by rkuhn040172
I, for one, can't believe that garbage that Seagate has on their website.
Yes, numerous people answered this incorrectly and some got it right...binary vs decimal. 120GB isn't 120GB due to 1,000k vs 1,024 and so on.
And I know manufactures have been doing this for years and years. But the Seagate website actually talks about pre and post formatting...that's embarrassing...I hope that lawsuit goes thru successfully.
I can understand "rounding", but to blanantly lie is a whole other story.
by otl
by wlbowers
The larger the drive the more the overhead.
My 200gig wound up 186gig after formating
Lee
by mihkel183
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending