5 replies
by thechas
No special codes.
You are ALWAYS best off installing Windows XP on the target machine.
The issue for your specific situation is that the hardware is different enough between your generic PC and the HP that Windows is attempting to load drivers for the wrong hardware and then just hangs.
You can "try" removing the hardware devices that are different between the HP and the generic, then shut down and move the hard drive to the HP.
Still, all in all, you are best off formatting the drive and installing XP with the hard drive installed in the HP system.
Chas
by anansimann
by zombiebot
Hi - In similar situations I have had success with following the instructions detailed here -->
http://www.mostlycreativeworkshop.com/article11.html
Obviously you will need to carry out the above instructions with the hard drive in one of the generic IBM compatible machines so you can get into Windows.
This removes all the device specific hard disk drivers with the default Windows drivers.
Once that has been done, put the drive back into your Pavilion and hopefully you will get a successful boot of Windows.
Good Luck,
Rob
by anansimann
by adent888
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending