4 replies
by cheaptrick Accepted solution
by robo_dev Accepted solution
If the whole digitizer does not work at all, then typically there is a flex ribbon cable that connects it to the main PCB of the unit.
In some devices the ribbon is plugged into an edge connector internally, so just unplugging/replugging it makes it work.
Knowing how cheap these devices are, they probably use conductive adhesive, and it's dried up and cracked. A little touch up soldering and/or conductive ink/glue and you may be able to fix it. Sometimes the ribbon cable itself has failed, so a dab of conductive paint 'may' fix that.
by cheaptrick Accepted solution
by cruciows Accepted solution
This discussion is closed to new replies.
Trending Tablets posts
Sort by Trending