Discussion Locked

How to print a smooth photo (no dots)

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

My printer is Epson Stylus 820, O/S XP.
Often times the print out photo has "dots" all over the picture. How can I get a smooth photo printed.
Thanks.

7 replies

by fred07

Hi,
Make sure you have the xp drivers loaded and I would run a virus scan through symantec as there are a couple of viruses out there that affect printers differently.
fred

by jschein

Get a new printer... that is a standard printer, not known for graphics printing quality... Buy a new one for 150-200 made specifivally for photo images.

by thechas

Clean the paper path completely.

Any paper dust that is in the path can get onto the ink. This simply shows up more when you print a photo as there are not open spots on the page like there are for text.

You need to clean ALL rollers and the bottom of the print head.
Use either a printer cleaning sheet, or a damp cotton cloth.
Do NOT use alcohol on the rollers.

Chas

by gdh19701

When you are getting ready to print, and have selected File > Print, you will want to specify the particular resolution in the properties page of the printer. Once at the properties page, there will be several tabs to choose from. Select the tab indicated by "Paper/Quality" and choose one of the Photo paper (glossy or smooth photo paper) or 360dpi (or best resolution available) paper. Below this, select the radio button labeled "best" under the Quality section. You may optionally specify these preferences for the print job by clicking on the advanced button near the bottom right hand corner of that same "Paper/Quality" tab.

While some paper is better than others, I would also suggest using photo quality inkjet paper (preferably Epson branded) but any major manufacturer will have paper coated specifically for your Epson printer.

Hope this helps, and good luck.

This discussion is closed to new replies.