Discussion Locked

How to print from LPT to USB port?

0 helpful
12 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
My new gateway comes without parallel LPT ports, but only with USB ports. OS inatalled is windows ME. My old DOS based tax application program only can directed to LPT ports for printing. I can run that program on windows me. How can I direct the material to print on printers attached to USB ports.

12 replies

by wyldchilde

DOS applications don't have support for USB, so you probably won't be able to print directly to the USB. If your faxed program allows you to export saved data to a text file, you can export into the OS and print to the USB once you have the USB printer driver installed.

by bucko77

I don't know if this will work but...

You can capture a Printer Port (LPT1) to a network share.

If you set your printer up as a share and then capture LPT1 to \\<>\<> you might just pull it off

Good Luck

by william jay

Hi, gotta love answer number3, and also there may be a hardware gender-bender to do that translation and fool dos ...

by shanghai sam

If all else fails, you can print that file somewhere else -- even if the other computer does not have your software. I am not sure how well it would work, but it could be worth a try. One thing you need to know, though is what printer the other computer will be using (you can also go to Kinkos or some place that has a print service) with the file. And, the computer you are sending from needs to have some DOS capabilities.

To make this kind of file you just have to install the type of printer that you will be using and open the file and in the print window, select "print to file". This will create file with .prn as the extension. It makes it unneccessary for the computer you print it from to have your software or fonts.

by shanghai sam

In the answer about the .prn file I forgot to mention that after you install the type of printer the other computer will use, you have to make sure you use that as the printer for your file before you make that .prn file.

by shanghai sam

In the answer about the .prn file I forgot to mention that after you install the type of printer the other computer will use, you have to make sure you use that as the printer for your file before you make that .prn file.

This discussion is closed to new replies.