Discussion Locked

HP Omnibook XE2 Bios Password Removal

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a client with a Omnibook XE2 who has locked himself out of it.i need to get the BIOS password removed. HP will not tell me how to do this without the original sales reciept, but the customer has long since lost it.
there was a similar request last year by 'Daveman' and he said he found two solder terminals to short to wipe the bios.
does anyone know which ones they are ?
or have any other solutions?

6 replies

by hinrgman

I have had the same problem. I removed the bios battery and the battery for the laptop. This reset the bios. Make sure there isn't a password on the hard drive. Info on the bios battery should be in the manual or on line at HP.
good luck

by dcosgrove

Some bios chips can retain data for hours with no battery. You may have to leave the battery out overnight to fully clear it.

by andyinlondon

i know ... had the battery off for three days, still held the password on rebuild.
There should be a clear cmos jumper point on the board some whare. but it is unmarked solder points.
does anyone know which ones ?

This discussion is closed to new replies.