Discussion Locked

HP Pavilion 6535 Ethernet Card

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a HP Pavilion 6535 that has both a Modem card and a Belkin F5D5000 Ehternet Card. The Modem card works correctly, but the Belkin Ethernet card or the computer itself is fighting the installation of the drvier for it.

I went directly to Belkins website and downloaded the correct driver (this machine is running WIN98).

When I try to install it it locks up the computer. I've even gone to DriverGuide.com and downloaded a few different files there and ended up with the same result.

I know this is an old machine but it works fine otherwise, and would like to have both the Ethernet Card and Modem Card on it since the person that is getting the machine lives out of state and hasn't told me what he's to be using to access the internet.

5 replies

by dryflies

go to the device manager and see what it says about the belkin ethernet card. Try removing the device using device manager and installing it anew.

by willcomp

Start with dryflies' advice. If that doesn't work you probably have either a defective NIC (doubtful) or an IRQ conflict (probable).

Most older HP Pavilions have a combination modem/sound card (Rockwell/Conexant Rip Tide). They are an IRQ nightmare.

Best approach would be to install a 3Com 3C905B NIC. Drivers are built-in for Win98 on up and they are stable, reliable cards. Can be had on used market for about $5.00 or less. I recommend that you keep a few.

If 3Com is not an option, try another brand of PCI NIC.

Last option is to remove sound card/modem and install NIC with other card removed. Re-installing combo card may be a problem. Drivers are hard to find. If necessary, I will help you locate.

Dalton

by darrynmarr1979

great advise above, try your bios settings too see if u have an option to reserve irq for modem and turn it off, then install the NIC first, then modem, as u probably know on win98 most cards like sound, modem and network try to assign themselves to irq 5 or seven, 9 if available, if nothin else works, diff NIC like 3com etc

This discussion is closed to new replies.