12 replies
by randerson7
by dustyd
You may have to follow the mfg. instructions exactly to install it. Usually you must install the software first, then connect the printer via USB. Try installing directly to a USB port off the PC's motherboard. (*Rear of the computer) Some USB printers do not like USB hubs, or you may have a cable extension that is too long for USB to support. (16ft. is the usual max.)
Check ContolPanel/System/
by randerson7
Poster rated this answer.
by dustyd
You may have to follow the mfg. instructions exactly to install it. Usually you must install the software first, then connect the printer via USB. Try installing directly to a USB port off the PC's motherboard. (*Rear of the computer) Some USB printers do not like USB hubs, or you may have a cable extension that is too long for USB to support. (16ft. is the usual max.)
Check ContolPanel/System/Hardware/DeviceMgr. Go all the way to the bottom and check for what USB controllers you have installed.
by randerson7
Poster rated this answer.
by diamond
by randerson7
Poster rated this answer.
by hrhold1
sometimes this will resolve a USB issue:
Check your device manager to see if the OS USB root hub is installed. Then see if the installation disk with the priinter has a USB folder or a driver folder with a USB device driver within it, occassionaly devices require thier own USB device driver to function withiin an OS.
Hope this helps, good luck ... H
by randerson7
Poster rated this answer.
by diamond
by randerson7
Poster rated this answer.
by randerson7
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending