Question Locked

I have problem with my hard drive. Can any body help me?

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a new Western Digital raptor (10,000 rpm) hard drive and I'm having problems with loading an OS onto it. I tried loading a legitimate copy of windows xp pro and it says Unknow Disk (there is no disk in this drive) four times. Then if you press any button after that, a blue screen comes up and says that there is a problem with the setupdd.sys file Page_Fault_In_Nonpaged_Area. And the Technical Information: ***STOP: 0x00000050 (0xE5139298,0x00000000,0xF74139A8,0x00000002). Also followed by ***setupdd.sys - Address F4139A8 base at F73Ec000, DateStamp 41107c8f.

2 replies

by bart777

That 0x00000050 error comes from a bad display driver. I haven't seen it come from a drive error before.

Can you get the box to boot into safemode at all? If so then replacing drivers would be where I would start. I would start with any drivers for the drive itself and remove any drivers that were added for the video card. You can go back and get that later.

If this doesn't help then I would reload the box. Also run WD's diagnostics on the drive just to make sure you didn't get a bum drive.

Good Luck

This discussion is closed to new replies.