Discussion Locked

I/O Card Parity Interrupt @F000:BAFC

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Upon boot up on a Dell OptiPlexGX110 running 98SE the following message appears on a black screen:
I/O Card Parity Interrupt at F000:BAFC (AC57, 6D75, 319A, or BB51)
Press (S) to Shut off NMI, (R) to Reboot, or any key to continue.
R reboots but comes back to the black screen with another I/O line message with different location.
Any key brings another I/O line message different location.
S continues the boot and the PC seems to work fine.
This machine is connected to network in a work enviornment. Server is running 2000.
Any thoughts out there?

7 replies

by willcomp

It most likely is a problem with an I/O card or device. Try removing each installed card and see if error clears. Could also be caused by an on-board device such as NIC or sound chip. You will have to disable those in BIOS to troubleshoot.

Have you added any cards recently? If so that one would be the prime suspect.

Only fix I know of is to replace card.

Dalton

by inmortal78

I took the wlan card and put away from the laptop, definitely is a I/O issue, just canm be any of the PCI devices on the laptop.

Regards

by eproductsplus

Hi Lewbrain,

I am experiencing the same problem as you had, and also with a Dell computer (Dimension 4700). Please Tell me how did you resolve it?

Thank you!

Jason

This discussion is closed to new replies.