Discussion Locked

IBM Aptiva + Win95 <> Vanta LT PCI

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Installed a Vanta 16 MB PCI card in an IBM 2137 E56 PC w/ATI onboard video (no jumper disable feature). Win 95 OSR2 will load w/16 colors but not 256 or more (screen will go black just before the desktop loads) Tweaked everything but overlooking something (don't know what). Yes, I downloaded drivers, reinstalled W95 (however, thinking oemusb application causing the problem) Advice? Think upg. to W98+ is the answer? Manual IRQ assign in BIOS? (Updated BIOS, too) Card works, there's probably a DMA conflict with the onboard video (hey, I'm talking to myself!) Thanks.

3 replies

by admin

Sounds like a driver problem. Re-installing 95 over the top won't necessarily fix this. Sounds to me like a clean install or removing all traces of driver changes (ATI has had trouble with this) and then adding the card may do it.

by ferocious

I removed the PCI last night, exported the NTKERN registry keys and deleted them since they were causing start up problems. I also removed the loadwc.exe file. After that, the PC started behaving itself. My next approach is to check the card's compatibility by installing it on my Intel-based 233 Win 98 computer to see if it is not faulty. The reason I say faulty is because I increased the colors to 256 and after restart the screen went black. I am confident I will fix the issue, but it feels like a science project!

by admin

Sorry about not e-mailing you back immediately, I "replied" to the message instead of sending a new one directly to you... :0

This discussion is closed to new replies.