Question Locked

IBM ThinkPad T41 won't recognize USB 2.0 Ports (sees them as USB 1.1)

0 helpful
24 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hello all,

I have been battling this for quite sometime and I've run out of options. Here's the details - As you can see from the subject, I have an IBM ThinkPad T41 laptop that is running XP Pro SP2. I'm 100% sure that the 2 USB ports on the system are 2.0 (there were, at one point running this way). All of a sudden now I keep getting the "This device can perform faster" message everytime I plug any USB device into either of these ports. I've checked to make sure the BIOS of the system is up to date I've removed and reinstalled the USB controller drivers. Nothing seems to work. Is there anyone who has run into this problem that can help me? Thanks a lot.

24 replies

by hal 9000

http://tinyurl.com/2grmcp

And install them onto your system as these will be the newest Drivers available they should bring the system back to full working condition.

Col

by rmohammed210

Lenovo now handles the support for both IBM ThinkCentres and Thinkpads. If there's any driver that you might need check it out. Another thing though is the laptop plugged in when you get this message because some USB2 devices might need additional power. Hope this helps.

by holstein

I've got the same problem but the links here (to drivers, etc.) haven't helped. Anyone have a solution?

by greg_thornton

Hey guys, thanks for taking the time to reply to my post. I had already tried the things you mentioned...still the same. It's really weird. I can't understand how it would all of sudden lose the 2.0 capability. It doesn't seem to matter what kind of device I have plugged in. The battle continues...

by hal 9000

It's time to call the maker Leno now if I remember correctly and ask them about known problems between M$ patches and their Chip Set or drivers and when a solution will be available.

What has most likely happened is that a M$ Patch has killed off the USB 2 drivers and these need rewriting to make the USB 2 ports work at their proper speed again.

Col

by greg_thornton

Thanks HAL 9000...That does seem like a logical suggestion. I'll contact Lenovo and let you know what happens. Thanks again.

by mwohlgem

Hey Greg,

I am having the same exact problem. I have reinstalled Windows five times this past week trying to figure out what's going on - very frustrating. Did you make any progress with Lenovo? I called them a couple of months back when this first started, and they didn't help. Please let me know.

Thanks, Mel

by fl.mello

Dear friends,

my T41 with Windows XP SP2 is presenting the exactly same issue!

What is strange is that it shows a usb hub controller with 6 ports 6.0, but the ports that I can use to plug my usb devices are being controlled by hubs of USB 1.0.

I am absolutelly sure that before this was working as a 2.0 USB!

Does anyone know the solution for this?

Thanks,

by jokmi123

We've had this prob now for some months. Whaddaya think it's ever gonna be solved.

by hal 9000

That's a hard ask. I'm betting that IBM didn't do anything about the problem prior to the sale and the new owners are still trying to find their feet when it comes to what they have bought.

Col

by jeduk

I have been having a similar problem trying to set up a printer via USB on my T41. The problem seems to have been reduced, but not eliminated, by using a shorter cable. That might be worth a try.

Jed

by holstein

I have spent weeks searching for a solution, visiting various message boards and discussion groups. The latest I'm reading, at Thinkpads.com, is that we are all experiencing an issue that only a motherboard replacement can fix.

Here's a thread you might check out:
http://forum.thinkpads.com/viewtopic.php?t=40475

There are actually two threads on Thinkpads.com regarding this issue. On both, everyone talks about drivers and Windows re-installs and etc. But the motherboard replacement is the one that some say is the only true fix. HOWEVER...

I believe I've seen on at least one thread that the problem came back even after a new motherboard was installed!

The easiest solution is to buy a PCMCIA card that has USB ports. They don't cost much. I've not done this yet, but seeing as how putting a $300 motherboard in an old-ish laptop just for USB 2.0, I will likely be going that route.

by lirpa4165

Found a probable solution. Check out this forum, page 5. Thanks to dak1640.

http://forums.windrivers.com/showthread.php?t=58031&page=5

"OK, I have solved this problem with USB 2.0....I am an engineer and after experiencing it myself & reading 1,000,000 posts etc; I have finally found the answer.

Evidently the USB connectors oxidize after time. This added resistance causes a feedback loop downgrading the USB port to 1.1 The simple fix is to take your wife's (or mom's) emery file and clean the contacts on both the thinkpad and the USB cable you are plugging in"

There may be something to it. I blew out my USB ports, sprayed with contact cleaner and worked a connector in and out to clean. It would work briefly before the popup came up. Will have to get an emery file.

by sgt_shultz

imho it is too abrasive. the contact cleaner probably did it. or we used to gently rub with a red or pink pencil type eraser. that contact coating is very thin so i would avoid abrading it with anything with mineral coating...

by lirpa4165

It seems to work somewhat but eventually the balloon pops up. Appears to be more of a contact problem. If I leave the USB plug out just a hair it seems to make better contact. Must be defective USB ports. Will just have to learn to live with it.
:-(

by jcag

So I tried the 'cleaning of the contacts' with everything from paper to an emery board and it didn't work. Besides I also have a port replicator and that also has the same problem.

After taking the machine apart and blowing out the dust with compressed air and cleaning it with a solvent, that worked. There must be some credence to the increased resistance with the collection of dust theory.

Anyone want to buy a USB/PCMCIA card?

by ktyger

Jcag:
Thank you for your post. You have helped me tremendously. Yes, I will buy the card. I work in San Jose, CA same as you. Please email
My best,
Karen
ktyger@qualcomm.com

by dvmierlo

The reason why I know this is a very probable solution is that this behavior very quietly shows itself on my laptop. I have a Thinkpad R50p.

When connecting my USB drive, it was only seen as an 1.1 USB device. After disconnecting the cable from the USB drive and the laptop I gently but firm connected and disconnected the cable WITHOUT the USB drive attached to it.

I connected the USB drive again and guess what... I had my 2.0 device again.

How about that ;-).
Time to buy some of that contact spray :-)

Dennis

by troyag

Ok solution to this was back then when working on the T 4x series, was in device manager to unistall everything under usb controllers (yes unistall, not disable or update) all listings of the USB hubs. Once that is done, do a plain scan for hardware changes, and let the system reinstall the drivers again, and your popups will disappear.

by holstein

I'm curious to know how many have seen their USB issues turn into system board issues. My story goes like this:

First I experienced the USB 2.0 = 1.1 problem. Then one day, out of the blue, I touched my laptop keyboard and the screen when funky gray, then black. I had to reboot, but touching the keyboard the wrong way sent the screen to blackness again... and again. I knew I was dead, so after many reboots I was able to back up all my important stuff.

Next was a call to IBM, which right out of the gate informed me my system board was going to need replacing. This, they said, would fix the USB issue, too. (It did.)

The downside to the whole thing was that I learned you can't just pick up your ThinkPad by one side and hold it like a plate of food. I guess your computer can 'bend' a bit and somehow break the system board.

I also learned that, for my whopping $575 repair bill, I could also have any other issue taken care of at the same time. So a sometimes-noise cooling fan got replaced, as did my palm rest/touchpad. (They don't do power supply, battery or screen replacements under the $575 fix.)

The $575 price did include shipping both ways, which helped ease the pain.

by lonesomepine333

Your USB ports are 1.0. Purchase yourself a 2.0 USB hub....it plugs into the USB port and has room for other USB plug ins...mine has room for 4...it comes with a little power supply they are relatively inexpensive , and will allow information to pass through faster. Hope this helped.

by nneed

After more than a couple of days of hair plucking from my bald-head. I stubled onto this fix.
problem: usb ports working, but not at USB2 speed (get that sorry msg saying that device could run faster if plugged into a HI-Speed port).
FIX: Open deviceMGR->click on VIEW->click on Show Hidden devices.
at this point, you will see new unknown devices appear. now all you need to do is "Update Driver" for these unknown devices (which are Storage Volumes & Generic Volume) vola you are done. now KICK-ROCKS.

This discussion is closed to new replies.