Discussion Locked

installing Windows XP OS

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I am having problems re-installing a new XP OS to my machine. Setup of the operating system seems to go fine... but whenever the computer is restarted it won't boot. My machine will not boot unless it has the XP cd to boot from. Any ideas how I can get this machine to boot correctly without requiring the XP CD at start up? Any ideas are much appreciated.

2 replies

by robapacl9

Sounds like either your setup is wrong or the HD boot section isn't right. Most boot procedures go from "A" to CD to HD, looking for the boot data. If the HD is OK, you can try making that the first boot, instead of "A", or second, instead of CD. If your HD boot is screwed up, it will only boot from either the floppy or CD. Apparently, the only way you can really do a clean install is to reformat the HD before installing XP. It likes to keep garbage files as souvenirs. I don't know what I would do without Maxblast to check the HD and do the format without an argument. I have several spare HDs around so if I have data I don't want to lose, I take the spare, format if necessary, make it master, and use the old master as a slave to get at the data. Hasn't been a problem yet.

by Member 19528012

make sure that if (esp if you have more than 1 HD or have a mass storage device (zip disk etc) ) that it is pointing to the correct device, i use SATA and it is very testing, i have to modify the boot.ini and copy it in using the recovery console in win setup.

Mine sets the default boot partition to he ZIP disk (it is on the primary IDE chan whereas the HD is on the SATA chan.)

Paul

This discussion is closed to new replies.