Discussion Locked

Internet lan connection problem

0 helpful
15 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a brand new computer that is set up on a network. It connects to the server just fine, but the internet won't work. There are 10 other brand new computers with the same exact settings and on the same network and they are working just fine.This one has the same network settings and everything, but no internet. I checked the settings for internet connections, and they are all set for the lan, but still nothing. I made all settings identical to the others that are working, but that also did no good! Any suggestions?

15 replies

by pschubitzke

You may want to verify proxy settings. If you are on a network, your administrator may be using a proxy server to connect all the machines to the internet. If this is the case, you may want to try to enter the proxy information into I.E. by clickingon >Tools>Internet Options >Connections Tab then LAN settings.
Hope this helps.

by eastexpert

If you are using MS Proxy in your network, there's one thing to check. Without a MS Winsock proxy client, you're only able to browse the internet via IE (provided that proxy settings for the LAN are correct), but no other internet activity is allowed until you install the MS Winsock proxy client. You do it by accessing the share that MS Proxy Server creates upon installation. Then you check its settings in the Control Panel/WSP Client -- that it is enabled. With this Client, you can do everything, not just browse the Web and access FTP.

Another thing to check: aren't there duplicate IP addresses present in your network? This is a disrupting thing for your network, I suggest you use DHCP server to give out the IP addresses, or you manually check that all addresses in the network are distinct.

Also if using proxy server, verify the LAT (local address table) on it. Your "faulty" computer might be outside Proxy LAT.

Diagnostics: Check for duplicate IP's; Check the netmask to correspond to one you assigned for this network; Ping localhost(127.0.0.1); Ping own address; Ping other computers on the network, including server; Check if at least Web and FTP services work; Re-read this posting's issues about MS Proxy.

Hope this helps.

by eastexpert

If you are using MS Proxy in your network, there's one thing to check. Without a MS Winsock proxy client, you're only able to browse the internet via IE (provided that proxy settings for the LAN are correct), but no other internet activity is allowed until you install the MS Winsock proxy client. You do it by accessing the share that MS Proxy Server creates upon installation. Then you check its settings in the Control Panel/WSP Client -- that it is enabled. With this Client, you can do everything, not just browse the Web and access FTP.

Another thing to check: aren't there duplicate IP addresses present in your network? This is a disrupting thing for your network, I suggest you use DHCP server to give out the IP addresses, or you manually check that all addresses in the network are distinct.

Also if using proxy server, verify the LAT (local address table) on it. Your "faulty" computer might be outside Proxy LAT.

Diagnostics: Check for duplicate IP's; Check the netmask to correspond to one you assigned for this network; Ping localhost(127.0.0.1); Ping own address; Ping other computers on the network, including server; Check if at least Web and FTP services work; Re-read this posting's issues about MS Proxy.

Hope this helps.

by mjchekal

I would also check the simple things. Is IP working past the router (i.e. can you ping this site). You may have a hub or protocol issue. If you have multiple protocols on the same machine you may be getting network connectivity through the other protocol. I would also check the NIC for bad packets to the Web

by shanghai sam

Steps to take

1st Verify your IP,Default Gateway and Subnet Mask this can b done by

A.) at a MS-Dos prompt type ipconfig /all|more
B.) start > run > winipconfig >ok select your ethernet card from the drop down and check settings (remeber your gateway IP)
IF your using DHCP trying renewing your
renewing

2nd see if you can ping the router on your LAN (this should be the same IP as your gateway is if its not theres your problem
MAKE SURE gateway is correct

3rd Ping the DNS servers you use (for Name to IP resolution) you should most likely have 2 IPs for your ISPs DNS servers
If your getting replys back then your getting outside of your network via IP
and your havingproblems resolving names to IP.

4th Try pinging a website by its name if you get a request timed out again your probably having trouble resolving names to IP if you get a reply back then you can narrow it down to a browser problem so:

Open up a web browser and type
http://204.162.96.215/ this is the IP address of go.com if it comes up this way check all browser connection settings and proxy settings

5th go to a MS-Dos prompt and type
tracert 204.162.96.215
see where it stops if its going to your router and stopping or where also try tracert go.com or yahoo.com and see if it stops at the DNS servers

6th If you have verified that ALL settings are correct and are still havingtrouble you may want to go to control panel and network highlight you ethernet adapter and click remove and the reboot and reinstall it just dump the whole network coinfig for the card

Hope this helps

by for7676

ping your router to make sure that you have it's address correct, if so, ping outside the network. Also verify that your proxy settings and DNS settings are correct

by curtis864

I would check the other suggestions first by pinging and tracerouting, but also check the device that is sharing the internet connection. If it is a tiny box that is meant for internet sharing, it might have a maximum number of clients it can serve.

This discussion is closed to new replies.