7 replies
by syscokid
Is this related to your previous question? If so, running fdisk and format should fix it.
If this is another drive that previously worked, it means it can no longer read the boot sector. Boot from flpooy and run fisk /mbr to try and repair the Master Boot Record. Then run sys.exe as follows
sys C:
to restore the OS.
by adburgin1
by ohmboy
Considering the first answer you received; perhaps initially try the less volatile of the procedures described:
In front of the A:\- prompt, type sys c:
This will restore the system files from your bootable floppy disk (in the a: drive) to your root drive (c:) on the hard drive. Sometimes, these system files go amiss for whatever reason. In any case, it won't hurt to re-apply them even if they are still on the hard drive. It is best to use a bootable floppy disk that contains either DOS 6.22 OS files or a boot/rescue disk that you created when you installed Win9x.
Should you not have success with this procedure, then CAREFULLY try the command (in front of the a:\-prompt) fdisk /mbr
This will enable you to further track and hopefully fix the master boot record; this is entering "thin ice" territory and you should only do this if you feel confident about what you are doing. Consider employing the help of a techie friend or a good shop that you feel is competent with sensitive issues.
by adburgin1
by m1wheeler
by adburgin1
by adburgin1
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending