Discussion Locked

invalid page faults and fatal exception

0 helpful
23 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

does anyone now how to fix these errors that windows shows me:

Explorer caused an invalid page fault in module KERNEL32.DLL at o15f:bff898ef

explorer caused an invalid page fault in module KERNEL32.DLL at o15f:bff9dba7

ICWCONNI caused an invalid page fault in module SHTML.DLL at 015f:70445ddl

runonce caused an invalid pagefault in module KERNEL32.DLL at o15f:bff9dba7

A fatal exception 0D has occurred at 0028:C0003abf in VXD VMM(01) + 00002abf This application will be terminated
a fatal exception OE has occurred at 0028:C0040049 in VXD VCACHE(01) + 0000076d this application will be terminated

If you can help me solve these error messages I would appreciate it.

send your response if you have a definet answer that willsolve these errors to cholt97@hotmail.com

23 replies

by guy

If its Windows 98 could be a problem with a corrupted .pwl file. Try deleting the *.pwl files. See Technet Q187965
If its NT could mean not enough RAM see Technet Q237007

by dmiles

The most common way to repair corrupt files of this sort was to insert the OS CD-ROM and run the setup over,takes up time yet it saves you,reinstall the updated drivers.

by bblunden

It does look like you have a corrupted file somewhere, but I wouldn't go so far as a reinstall yet. You really haven't given us enough information. You should tell us when you are getting these errors (printing?), have you loaded any new software? Is this a fresh OS install? Help us out here.

by mcar5000

if you running win98..check for corrupted system files using the file checker under accessories--system tools--system information--use the system file checker under the drop down menue of tools...if this does not help, i would reload the operating system to over write anything else that might be corrupt...hope this helps

by e403f

it seems like u have some problems with your display driver >>VXD VMM(01) + 00002abf
..or with your video card ..posible conflict with the driver, but it can be also an electonic pb.
is Norton Crach Guard instaled on your sistem?! UNINSTALL IT! ..and other programs that use code ring 0 ..debugers..softice..u know..

by briggz

Hi, i have had the same problem with the same error messages, the vmm is the virtual machine manager and the vcache is the windows disk cacheing utility, these problems are memory related and i found that nothing short of a format and reinstall would cure them. I tried the system file checker, i tried extracting vmm.vxd and the associated files, i also tried reinstalling windows over the current config ( without formatting), nothing worked. the only thing different about the new installation isthe fact that the dos memory configuration is different from the previous, where vmm now seems to take up much more of the upper memory area than previously. The advice i recieved on this problem seemed to point to faulty ram, however my system seems fine now. hope this is of some help to you.

by tony berni

Wow...are you getting all these errors on the same machine.
If so then perform a clean Windows install.
If the same error come up again then your motherboard may be faulty. Try changing the motherboard. OS and motherboard are usually the key to compounding errors

by ab2hu

Hey Chris,
I'll tell you what works for me. Download Internet Explorer 5.0 if you havn't already done so. This will make the computer 'switch' to a new set of KERNEL's and it should be healthier and happier. If you've already done that, Uninstallthe version 5.0 and going back to the original. The old one is there, you just don't see it.
If all else fails, re-install windows. It's kind of a long term answer to a short term problem....even quicker is just...
HIT IT WITH A SLUDGEHAMMER!!!

Let me know how it workz...
Cody Zink AB2HU
p.s. I got my internship!

by gray ce works

TURN OFF GRAPHICS ACCELERATION!!!! OR AT LEAST TURN IT TO BASIC. YOUR GRAPHICS CARD CAN'T HANDLE THE COMMANDS AS FAST AS WINDOWS SENDS THEM AT FULL ACCEL REGARDLESS OF HOW MUCH RAM YOU HAVE OR HOW MUCH RAM YOUR VIDEO CARD HAS.

by rmed

Hi!
The problem may be in faulty built-in cache memory chips on motherboard. Try to disable
external cache through the bios setup.

This discussion is closed to new replies.