Question Locked

IRQL_NOT_LESS_OR_EQUAL Technical Information : STOP: 0X0000000A(0X00000010,

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Dear Sir,
Pl z. help for this problem

"IRQL_NOT_LESS_OR_EQUAL

STOP: 0X0000000A(0X00000010,0X00000002,0X00000000,0X805527BC)

sisirsahoo@yahoo.com

8 replies

by oldbaritone

Those are some generic places to begin. There isn't much specific information in your post.

Also, unless you love SPAM, it might be a good idea to remove your email address from your post. (Edit it)

by sisirsahoo

Actualy, I am trying to install Windows2003 Stnd. Editionon on a HP ML350G6 Server, who's Configuration is Quad-Core Intel? Xeon? Processor E5504 (2.00 GHz, 4MB cache,2x146GB SAS HDD on RAID1, 1x2 GB DDR3) I am getting error "IRQL_NOT_LESS_OR_EQUAL STOP: 0X0000000A(0X00000010,0X00000002,0X00000000,0X805527BC)at Installing Windows of 2003GUI Screen @36Minuite of status bar.I tried with clearing of NVRAM, by on the System Maintenance Switch, but still problem is with me.

Pl Z. help ASAP at sisirsahoo@yahoo.com

by 93961

Remove your e-mail address from both your post else you will receive SPAM mails.

by 93961

by churdoo

Are you using HP's Smart Start to assist your install? If not, I suggest doing so as it will pre-load all of the correct drivers for your HP server. The STOP 0A error is sometimes caused by an incorrect driver.

Also, your RAM is a little light; for what memory costs these days consider adding RAM in a supported configuration for your G6.

Lastly, your ML350 G6 server should still be within the original 3yr warranty with HP so you can use HP support as a resource as well.
Good Luck!
--C

by mjd420nova

I've seen a similar fault and it was caused by a left over driver for an HP printer on a parellel port. The port had been redirected afterwards but the hook remained. Check model number if possible and uninstall any remnants of the old drivers.

This discussion is closed to new replies.