Discussion Locked

is it the monitor or the video card

0 helpful
10 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Just brought a new motherboard(soyo dragon lite)and video card ATI xpert 128. after browsing several web sites,monitor goes into standby mode and freezes or freeze up monitor shows lines. I tried to use the old video card (monster fusion-diamond) monitor won't come on at all. what could be the problem?

10 replies

by thechas

Since you had been using the monitor, I would suspect the video card.

The likely reason you are having problems re-installing the Monster Fusion, is that you did not un-install the ATI card from device manager before shutting down to change cards.

Before you give up on the ATI card, try the following;

1. Download and install the latest chipset drivers fro your system / motherboard.

2. Update / re-install DirectX (from Microsoft)

3. Download and install the latest driver from ATI.

4. Verify that your monitor is correctly identified in display properties / settings / advanced / monitor.
If necessary, download and use the monitor mfgs driver.

Chas

by jreedy

Could also be a problem with the new motherboard. There could be a loose connection in your AGP or PCI slot that the video card is inserted in. Also check your BIOS settings and check the Power management settings to see if it has a setting for turning off the monitor after a certain amount of time.

by sdavis00001

Would like to thank everyone for your help........but I believe the internet explorer 5.0 is causing the problem. This incident doesn't happen unless I'm on the internet.updated windows already, updated drivers for the card. called motherboard makers....etc... May just change to netscape. Had the computer on overnight nothing happen. played around with the computer for hours nothing happen, but soon as I got on the internet and surf................blink. black screen, monitor went shut down. Ifanyone has any more suggestions please help.

by techmark

Had a similar problem with a new monitor; I had to turn off the OSD Hardware Power saving on the Monitor & let Windows control it.
Also had problems in work environment with CMOS power saves & Windows. Now as a standard, we turn off the CMOS version & implement the Windows controls.

Hope this helps

This discussion is closed to new replies.