Discussion Locked

keyboard error or no keyboard present

0 helpful
10 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Pentium MMX200 G586SPA motherboard Sis 5511 chipset, Award bios Modular V4.51PG, Win 95.

This set was working OK. I tried to insert a PCI modem. It started the BIOS error of "keyboard error or no keyboard present. I removed the modem but same message. I tried different keyboards both AT and PCI type. There are voltages at the keyboard pins as follows: Pin1=4.2V, Pin 4=5.8V, Pin5=4.2V, however, when the power is switched on the keyboard light does not flash or lights.

Keyboard is dead and I can not set up bios, firmware or any other thing. What can I do apart from assuming it is the motherboard fault and throw it away.

10 replies

by tatar

I copied an exe and bin files for the Award Bios on an floppy and started the computer with the floppy in the drive. Nothing happens. As DOS is not loaded and the keyboard dead how can the Bios can be flashed?

by sgt_shultz

try other keyboard yet? if no joy on ps2 keyboard, try usb. if usb keyboard works see if you moved a cable while you were in the box. else you just have bad luck of having your keyboard port fail

by tatar

In my question I said that I tried different keyboards. The first Answer by lamvidao seems to work. When I have the oportunity I shall give him lthe points.

by dustyd

Sounds like you may have had an IRQ conflict. Try removing the BIOS battery on the motherboard, and then reinstalling with the PCI modem removed.

by lamvidao

Turn off PC. Reinsert keyboard and mouse.

Remove PCI card, remove CMOS battery and memory too. Wait for 2 minutes. Put back everything accept PCI card. And try to flash BIOS through floppy.

This discussion is closed to new replies.