Discussion Locked

Lifespan of cooling fan

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi,

I've been having a discussion with a colleague regarding the lifespan of a cooling fan. It is two years or 10 years? What are the determinants governing this?

For example, if a unit is being used daily for 10 hours would the cooling fan last five years?

Is there any research/stats on this? Or is it all anecdotal evidence, which is just as useful.

Thanks
nainish

5 replies

by gralfus

Lots of factors figure into the life of a product:
Ball bearings or something else?
Quality of workmanship in construction?
Dusty environment?
Mounted correctly (physical obstructions)?
Etc.

by thechas

We run many computers 24/7.

Our most common failure is cooling fans.

We have intake filters on most systems and clean them as part of periodic maintenance.

We see 2 different problems:
The lubricant for the fan bearing overheats and fails.
The bearing wears to the point that the blade can wobble too much, and locks against the fan housing.

Most of the fans we replace have been running for 5 years or more.

We have the most fan failures after a power outage. They just can't spin back up again.

Fan life is controlled by:

Bearing type:
Roller, ball, sleeve

How hot the environment is.

Dust and dirt.

The air at the fan itself should NEVER be hot.
If the air at the fan is hot, you need more cooling.

Roller bearing fans have the longest life.

Chas

by bluestockings

I am going to open the cassis and clean my blades. what is the best way to do this. I do not want to ruin my computer

by ozi eagle

The best way is with compressed air. Be careful though that you stop the fan from spinning when blowing air into it, as it generates electricity, which can damage your system. DO IT OUTSIDE as a lot of dust can be blown about. Also cleans the heatsink fins.

Failing a source of air, a cheap artists brush and a vaccuum cleaner do a decent job.

by bluestockings

Thank you so much for your kind reply. You made it sound much easier than HP. they gave me a lot of complicated instructions. I think I can do it the way you suggested. thanks again

This discussion is closed to new replies.