3 replies
by rewrite
Usb modems are notorius for connection problems (imho). If there is an ethernet port on the modem I would suggest using that instead. Enet cards are fairly inexpensive these days. You can pick them up for under $20.
Cheers.
RW
by piratetoolz
Check for the following conditions:
1. Are there any hardware conflicts in Device Manager?
2. How close together are the modem and the printer? You may need to move the printer. Some devices can cause interference that may in turn cause you to lose signal (the industry calls it 'sync')
3. Along the same lines, make sure that your phone cord does not exceed 10 feet and that you have installed all line filters.
Feel free to email me if you need anything else. I hope this helps!
by trollgod
Usb modems are notorius for connection problems. If there is an RJ 45 port on the modem use that instead ethernet cards are pretty cheap rite now. You can pick them up forbetween 10 to 20 bucks.
plus you may wanna check in device manager for conflicts.. probably better too use dr watson to see what the real problem is...
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending